Owners Manual

EqualLogic FS7500 Controller Hardware Maintenance Installing System Components
2–12
Figure 2-8: Controller Cable Connections
Routing the Power Cables Through the Strain Relief Straps
The strain relief straps are located on the D-shaped handles on the back of the power supplies. To
route the power cables through the strain relief straps, perform this procedure for each of the
power cables on each of the two controllers:
1. Create a small loop near the end of the power cable where it connects to the controller.
2. Secure the cord to the power supply handle using the strain relief strap. The loop that you
created in the previous step helps provide the strain relief.
Figure 2-9 shows how to loop the power cables through the strain relief straps.
Table 2-4: Controller Cable Connections
Number Description
1 SAN and internal network connections, including the IPMI cable
2 USB connection to BPS
3 Client network connections
4 Power connection to BPS power module
5 Power connection to power source