Owners Manual

EqualLogic FS7500 Controller Hardware Maintenance Maintaining System Components
3–8
Figure 3-5: Removing the Controller Power Supply
Installing a Power Supply
Caution: Always replace a power supply with a power supply that has the same output capacity.
The maximum output capacity is listed on the power supply label. The FS7500 controller supports
the 502 W Energy Smart power supply module.
1. If the controller has two power supplies installed, verify that they are the same type and have
the same maximum output power as the new power supply.
2. Slide the new power supply into the controller chassis. The release latch clicks back into place
when the power supply is properly installed.
Figure 3-6: Installing a Controller Power Supply