Users Guide
Table Of Contents
- Dell EqualLogic Host Integration Tools for Microsoft Edition Version 5.3 Installation and User's Guide
- About This Guide
- Introduction to Host Integration Tools
- Installation
- Obtain the Installation Kit
- Installation Considerations
- Install Host Integration Tools for Microsoft
- Install HIT/Microsoft on a Windows Server 2012 R2 Core Machine
- Install HIT on a Windows Server 2012 R2 Core Cluster
- About Remote Host Installations
- Install HIT on a Failover Cluster
- About Silent Installations
- Using HIT With a SharePoint Farm
- Remote Setup Wizard
- Remote Setup Command Line Utility
- Using the Multipath I/O Component
- Use the VDS Provider
- Use SCVMM With the Dell EqualLogic SMP
- Install the Dell EqualLogic Storage Management Provider
- Configure the Dell EqualLogic Storage Management Provider
- Create a Classification for Dell EqualLogic Storage Resources
- Import the SMP Through the SCVMM GUI
- Configure PS Series Groups
- Configure Group Access on Managed Hosts and Clusters
- Configure Storage for VM Rapid Provisioning
- Create a VM Template From a VHD
- Migrate the Rapid-Provisioned VMs
- Migrate Storage of a Deployed VM to Another Location
- Troubleshoot SCVMM Issues
- Supported SMP PowerShell Cmdlets
- Use the HPC iSCSI Provider
- Tools and Utilities
- Index
Remote Setup Command Line Utility
The Remote Setup Command Line Utility (also referred to as the Remote Setup CLI or RSWCLI) provides an alternative to using the
Remote Setup Wizard. You can perform the same set of operations provided by the Remote Setup Wizard, except that the setup and
configuration tasks are performed through commands executed at a Windows command prompt instead of the wizard. When you install
the Remote Setup Wizard, the Remote Setup CLI is also installed.
Topics:
• General Command Syntax for the RSWCLI
• Using RSWCLI Commands
• Discover a PS Series Array
• Initialize a PS Series Array
• List or Modify MPIO Settings
• List Included and Excluded Subnets for MPIO
• Include a Subnet or Adapter for Use by MPIO
• Exclude a Subnet or Adapter From Use By MPIO
General Command Syntax for the RSWCLI
The general command syntax is as follows:
rswcli -subcommand required-parameter="argument" [‑optional_parameter...]
The following constraints apply to the syntax:
• -subcommand—Prefix subcommands with a dash (-).
• "argument"—Italics indicate an argument variable, which requires quotation marks only when the argument variable contains an
embedded space.
• Optional parameters are enclosed in brackets ([]).
• A vertical bar (|) indicates “or” in a sequential list of items.
• Several parameters are mutually exclusive. If more than one of these parameters are specified, it is treated as an error and causes the
command to fail. The command parser automatically ignores any redundant parameters.
Getting Help on Commands
To see all the available RSWCLI commands and their options, enter:
rswcli -?
For help on a specific command, enter:
rswcli -sub_command -?
For example:
rswcli -Discover -?
Remote Setup Command Line Utility
Dell EqualLogic Remote Setup Wizard CLI Version 4.8.1000.8334
Copyright 2004-2020 Dell Inc. All rights reserved.
Discover uninitialized storage arrays
rswcli -Discover [-Detail]
4
Remote Setup Command Line Utility 29