Users Guide

Table 9. List Subnets Command Options
Parameter Description
IncludeOnly Displays only the included subnets. Cannot be used with the ‑ExcludeOnly parameter.
ExcludeOnly Displays only the excluded subnets. Cannot be used with the ‑IncludeOnly parameter.
Detail Displays the rules used to generate the subnet list as well.
Include a Subnet or Adapter for Use by MPIO
By default, all subnets, adapters, and IP addresses accessible to the group start out in the included list.
Use the rswcli ‑MPIOInclude command to include a subnet, adapter, or IP address for use by MPIO, or to move a subnet,
adapter, or IP address from the excluded list to the included list.
If the subnet, adapter MAC address, or IP address defined by these arguments is already in the included subnet, adapter, or IP
address list, the command will fail.
The command syntax is as follows:
rswcli -MPIOInclude -Network IP address -Mask IP address [-Force]
rswcli -MPIOInclude -MAC MAC_Address [-Force]
rswcli -MPIOInclude -IpAddress IP address [-Force]
rswcli -MPIOInclude -Default Include|Exclude [-Force]
The following table describes the command parameters.
Table 10. Include Subnet or Adapter Command Options
Parameter Argument Description
Network IP address (Required for a subnet) Designates a new IP address for a network that, in
combination with the -Mask parameter, matches exactly a subnet that is in
the excluded subnet list and moves it to the included subnet list.
Mask IP address (Required for a subnet) Designates a subnet mask to be used in conjunction
with the network IP address to define a subnet to be added to the included list.
MAC MAC address (Required for a subnet) Designates a new MAC address (also called physical
address) for a single adapter that matches exactly a MAC address for the
adapter that is in the excluded adapter list and moves it to the included
adapter list.
The MAC address can be specified in any of the following formats, where AA,
BB, CC, DD, EE, FF represent the high-order to low-order portions of a 6-byte
hexadecimal (48-bit) MAC address that uniquely identifies a host network
adapter:
● AABBCCDDEEFF
● AA-BB-CC-DD-EE-FF
● AA:BB:CC:DD:EE:FF
● AA.BB.CC.DD.EE.FF
IpAddress IP address (Required for an IP address) Designates a new IP address for a single adapter
that matches exactly an IP address for the adapter that is in the excluded IP
address list, and moves it to the included IP address list.
Default Include | Exclude Controls whether any new adapters or subnets are included or excluded by
default from MPIO usage. You cannot combine the —Default parameter with
any other parameter except -Force.
Force Use this parameter if the included list already contains a combination of
subnet, adapter, or IP address. This parameter will result in the included list
containing only one type (either subnet, adapter, or IP address), as specified
by the command used with the relevant parameter. If the existing included list
34 Remote Setup Command Line Utility