Users Guide

• Specify the ‑scheduleID= parameter with a schedule identifier (Schedule ID) for an existing schedule.
• You can obtain this identifier by browsing a schedule’s properties in the ASM/ME GUI.
• Click the right mouse button to copy the Schedule ID to the clipboard. A typical Schedule ID has the following format:
ee05bb76‑6ccc‑431a‑99b9‑37886a1d7748
• Enclose the Schedule ID in quotation marks if it contains an embedded space.
selections=
• Used with: selectiveRestore subcommand
• Specify the ‑selections= parameter with "Component{}" , where the object ID for the component to be restored is placed within
the braces. A semicolon-delimited list of object IDs can also be specified.
• You can also use the SSA names as they appear in the GUI to restore an SSA.
• You can get the object ID for any supported component, volume, and collection by executing the -list command with the –
components, ‑volume, ‑collections, and –showObjectID options.
secret=password
• Used with: configureCHAP subcommand
• Specifies the password that was established for the CHAP user.
sendOnFailure= {"Yes"|"No"}
• Used with: configureASM subcommand
• Specifying Yeswill enable all critical alerts, and specifying no will disable all critical alerts.
sendOnSuccess= {"Yes"|"No"}
• Used with: configureASM subcommand
• Specifying Yes will enable all warning and informational alerts, and specifying no will disable all warning and informational alerts.
sendTestMail
• Used with: configureASM subcommand
• Sends a test email immediately after configuring ASM/ME. A recipient list will be included in the test email.
shadowType=
• Used with: smart subcommand
• Specify the type of Smart Copy to create. ASM/ME supports only Transportable types and you can omit this parameter because
ASMCLI assumes a Transportable type.
showObjectID
• Used with: list subcommand
Specify the ‑showObjectID parameter to display the unique identifiers for each object.
showprops
• Used with: list subcommand
• Specify the ‑showprops parameter to display the following object properties in the output:
• For lists of volumes, the output includes the volume type, PS Series volume name, and read‑only setting.
• For lists of collections, the output includes all component names and volumes included in the collection.
• For lists of components the output includes the original volume list and application type (such as Exchange or SQL Server).
smartcopy
• Used with: configureCHAP subcommand
• Indicates that the credentials apply to snapshot access.
• smartcopyType=
• Used with: smart subcommand
• Specify the required form of Smart Copy.
• You can specify a value of snapshot, clone, replica, or ThinClone if your storage is configured to support these options. The
default value is snapshot.
smtpHost ={"host_name" |"ipaddress"
• Used with: configureASM subcommand
Using the Command Line Interface
107