Owners Manual
Table Of Contents
- Preface
- 1 Basic Array Information
- 2 Maintaining Disks
- 3 Maintaining Control Modules
- Supported Control Modules
- Interpreting Control Module LEDs
- Control Module Handling Requirements
- Identifying Control Module Failures
- Understanding Failover Behavior
- Maintaining Control Module Firmware
- Connecting Network Cables
- Removing a Control Module
- Installing a Control Module
- Replacing the Compact Flash Card
- 4 Maintaining Power Supply and Cooling Modules
- A Environmental, Power, and Other Specifications
- Index
2–1
2 Maintaining Disks
Each PS3000 Series array includes up to 16 hot-swappable disks. Disk
maintenance topics include:
• Interpreting Disk LEDs on page 2-1
• Disk Handling Requirements on page 2-2
• Identifying Failed Disks on page 2-3
• Removing Disks on page 2-3
• Installing Disks on page 2-5
Interpreting Disk LEDs
Figure 2-1shows how disks are numbered in a PS3000 Series array.
Figure 2-1: PS3000 Series Disk Numbering
Figure 2-2 shows the disk LEDs. Table 2-1 describes the LEDs.
Figure 2-2: PS3000 Series Disk LEDs