Owners Manual
Table Of Contents
- Preface
- 1 Basic Array Information
- 2 Maintaining Disks
- 3 Maintaining Control Modules
- Supported Control Modules
- Interpreting Control Module LEDs
- Control Module Handling Requirements
- Identifying Control Module Failures
- Understanding Failover Behavior
- Maintaining Control Module Firmware
- Connecting Network Cables
- Removing a Control Module
- Installing a Control Module
- Replacing the Compact Flash Card
- 4 Maintaining Power Supply and Cooling Modules
- A Environmental, Power, and Other Specifications
- Index
A–1
A Environmental, Power, and Other Specifications
Table A-2 describes the environmental, power, and physical specifications for a
PS3000 Series array.
Table A-2: PS3000 Series Array Specifications
Component Requirement
Weight of fully-loaded array 77.6 pounds or 35 kilograms
Operating temperature 41 to 95 degrees F / 5 to 35 degrees C
Storage temperature -22 to 140 degrees F / -30 to 60 degrees C
Maximum operating altitude 10,000 feet (3048 meters)
Operational relative humidity 20 to 80% non-condensing
Thermal output (fully-loaded array) 1700 BTU/hour
Operational shock 5 G for 10 ms 1/2 sin
Operational vibration Random 0.21grms 5 - 500 Hz
Input voltage 100 to 240 VAC (auto-sensing)
Input frequency 48 - 62 Hz
System input power 530 VA (maximum)
Power supplies Dual, 450 watts DC output
Maximum input power: 0.7 KVA
Input current: 7 – 3.5A
Height/Width/Depth 5.12” x 19” x 21.7” (13 x 48.26 x 55.1 cm)