Setup Guide
Table Of Contents
- Preface
- Introduction to PS Series Storage Arrays
- Steps for Setting Up and Using an Array
- Step 1. Set Up the Array Hardware
- Step 2. Configure the Array and Create a Group
- Step 3. Set the RAID Policy
- Step 4. Create a Volume
- Step 5. Connect to the Volume from a Host System
- Advanced Operations and More Information
- Index
ii
Copyright © 2006 EqualLogic, Inc.
September 2006
EqualLogic is a registered trademark of EqualLogic, Inc.
All trademarks and registered trademarks mentioned herein are the property of their
respective owners.
Possession, use, or copying of the documentation or the software described in this
publication is authorized only under the license agreement.
EqualLogic, Inc. will not be held liable for technical or editorial errors or omissions
contained herein. Information in this document is subject to change.
PS Series Firmware Version 3.0
Part Number: 110-0040-R2