Setup Guide
Table Of Contents
- Preface
- Introduction to PS Series Storage Arrays
- Steps for Setting Up and Using an Array
- Step 1. Set Up the Array Hardware
- Step 2. Configure the Array and Create a Group
- Step 3. Set the RAID Policy
- Step 4. Create a Volume
- Step 5. Connect to the Volume from a Host System
- Advanced Operations and More Information
- Index
PS Series 3000 QuickStart Step 3. Set the RAID Policy
22
Configure Member – RAID Set Configuration (RAID-10)
Select the desired RAID policy and click
Next to continue. The Configure
Member – Summary dialog box appears.
Configure Member – Summary
If the member configuration is satisfactory, click Finish. The following window
shows a completed configuration for a one-member group.