Owners Manual

PS3000 Series Hardware Maintenance Basic Array Information
1–2
Interpreting Operations Panel LEDs
The operations panel is used to monitor PS3000 Series hardware components. The
panel is not redundant, but an array can continue to operate if it fails. See your PS
Series array service provider for information about servicing the panel.
Figure 1-3 and Table 1-1 describe the LEDs on the PS3000 Series array
operations panel, which can alert you to errors and conditions that require your
attention. Serious problems should be reported to your PS Series service provider.
For information about other LEDs, see Interpreting Disk LEDs on page 2-1,
Interpreting Control Module LEDs on page 3-2, and Interpreting Power Supply
and Cooling Module LEDs on page 4-1.
Figure 1-3: Operations Panel LEDs
Table 1-1: Operations Panel LED Descriptions
Operations LED Color Description
Power (upper right) Off No power.
Green Power.
Array locator (upper left) Off No power or normal condition.
Flashing
orange
Administrator enabled the array locator function.