Owners Manual

Index-1
Index
A
array
back panel
1-1
batteries 3-1
control module restriction 3-9
control modules 3-1
cooling 4-1
disks 2-1
environmental requirements A-1
failure indications 1-2
fans 4-1
firmware 3-4
front panel 1-1
LEDs 1-2, 2-1, 3-2, 4-1
maximum network availability 3-6
maximum network bandwidth 3-5,
3-6
power supplies 4-1
protecting from discharge 1-4
shutdown procedure 1-4
specifications A-1
B
batteries
charging
3-11
servicing 3-1
C
cable strain relief, using 4-5
cables (network), connecting 3-5
cables (power), connecting 4-4
cables (serial), connecting 1-4
compact flash card
firmware requirements
3-4
identifying firmware 3-4
moving 3-8, 3-9, 3-11
replacing 3-4, 3-11
control modules
batteries
3-1
charging cache battery 3-11
checking proper installation 3-10
compact flash card moving 3-8,
3-9, 3-11
compact flash card replacement
3-4, 3-11
failover behavior 3-3
failure indications 3-3
firmware identification 3-4
firmware requirements 3-4, 3-9,
3-11
handling requirements 3-3
installing in array 3-9
LEDs 3-2
locating 3-3
removing from array 3-7
restriction on mixing 3-9
synchronizing 3-3
types 3-9
verifying operational status 3-10
cooling
indications of failure
4-2
initialization 4-2
installing module in array 4-4
LEDs 4-1
locating modules 4-2
removing module from array 4-2
verifying operational status 4-5
D
disks
failure behavior
2-3
failure indications 2-3
handling requirements 2-2
installing in array 2-6
LEDs 2-1
locating 2-3
protecting 2-2