Setup Guide

PS Series 3000 QuickStart Step 1. Set Up the Array Hardware
4
Note: Product returns will be accepted only in the original packaging or in
authorized packaging obtained from your PS Series support provider.
Description of Shipping Box Contents
Component Description
3U storage array
chassis
Contains one or two control modules, two power
supply/cooling modules, and eight or 16 disks.
Power cables Connects an array to one or more power sources. The shipping
box may contain multiple power cables to meet the electrical
requirements of the country in which the array will reside.
Caution: Be sure to use only these enclosed power cables with
this product.
Serial null modem
cable
Creates a serial connection between an array and a console or
terminal emulator. The cable has two DB9, 9-pin, female
connectors and is used only for the initial member and group
configuration or if there is no network access to the array.
Four-pole rack
assembly kit
Enables you to install an array in a four-pole rack. Instructions
for assembly are included in the kit.
Two-pole rack
assembly kit
Enables you to install an array in a two-pole rack. Instructions
for assembly are included in the kit.
Electrostatic wrist strap Protects sensitive hardware from electrical discharge.
Documentation and
CD-ROMs
Printed documentation includes the PS Series QuickStart,
Hardware Maintenance, Release Notes, and SAN setup poster.
The Group Administration and CLI Reference manuals and
the Group Manager online help are on the documentation
CD-ROM, along with the QuickStart and Hardware
Maintenance manuals.
Host Integration Tools for Windows
®
systems and related
documentation are on the HIT CD-ROM.
License and warranty information is also included in the
shipping box.