Setup Guide

PS Series 3000 QuickStart Step 1. Set Up the Array Hardware
12
E. Turn on Power to Array and Check LEDs for Errors
Before turning on power, be sure the array is at room temperature. If an LED
indicates a problem, contact the support provider for your PS Series array.
Disk LEDs
Backpanel LEDs
Disk LED Descriptions
Disk LEDs Color Description
Top Off No power or error condition.
Green Power.
Flashing green Disk activity.
Bottom Off No power or normal condition.
Red Error condition.
Operations Panel LED Descriptions
Operations LEDs Color Description
Power (upper right) Off No power.
Green Power.