Install Guide
インストールとセットアップガイド
4 ソフトウェアの設定
4. プロンプトが表示されたら、19ページの「設定情報の収集」からのアレイとグループの設定情報を入力しま
す。デフォルト 値を使用する場合は、Enterキーを押します。ヘルプを表示するには、疑問符( ?) を入力
します。
メモ: グループIPアドレスを入力した後、アレイがネットワークを検索するので、短い遅延が発生する場合
があります。
setupが完了したら、ディスクの記憶容量を使用するためにメンバーのRAIDポリシーを設定する必要がありま
す。24ページの「メンバーRAIDポリシーの設定」に進みます。
setupユーティリティを使用してアレイを初期化し、グループを作成する例を以下に示します。
例 - setup ユーティリティの使 い方
Login: grpadmin
Password: xxxxxxxx
The setup utility establishes the initial network and storage configuration for a storage array
and then configures the array
as a member or a new or existing group of arrays.
For help, enter a question mark (?) at a prompt.
Welcome to Group Manager
Copyright 2013 Dell Inc.
It appears that the storage array has not been configured.
Would you like to configure the array now?(y/n) [n] y
Group Manager Setup Utility
Do you want to proceed (yes | no) [no]?yes
Initializing.This may take several minutes to complete.
Enter the network configuration for the array:
Member name []: member1
Network interface [eth0]: eth0
IP address for network interface []: 192.17.2.41
Netmask [255.255.255.0]:
Default gateway [192.17.2.1]:
Enter the name and IP address of the group that the array will join.
Group name []: group1
Group IP address []: 192.17.2.20
Searching to see if the group exists.This may take a few minutes.
The group does not exist or currently cannot be reached.Make sure you have entered the correct
group IP address and group name.
Do you want to create a new group (yes | no) [yes]?yes
Group Configuration
Group Name: group1
Group IP address: 192.17.2.20
Do you want to use the group settings shown above (yes | no) [yes]: yes
Password for managing group membership:
Retype password for verification:
Password for the default group administration account:
Retype password for verification:
Saving the configuration ...
Waiting for configuration to become active......Done
22