Owners Manual

PS4210 Hardware Owner's Manual

2 Maintaining Drives

For example, when you install a drive, the timer starts. If you install another drive before 2 minutes have

elapsed, the timer is restarted. If no other drives are installed, the drive is configured after a delay of 2 min-

utes.

• If you install a drive during RAID reconstruction or verification, the new drive will not be configured until

the operation completes.

Removing a 2.5-inch Drive

1. Remove the bezel. See Removing the Bezel on page 2.

2. Press the release button (callout 1 in Figure 8). The drive latch opens and the drive emerges partway from

the array (callout 2).

3. Pull the drive out by the handle until it is free of the drive bay (callout 3).

Figure 8: Removing a 2.5-Inch Drive