Owners Manual

PS4210 Hardware Owner's Manual
3 Maintaining Control Modules
• The Ethernet ports and the Management port each have LEDs that indicate the port's status and activity. See
Table 6.
• Below the release latch is a column of three LEDs that indicate the status of the entire control module. See
Table 7.
Figure 15: Control Module LEDs
Table 6: Ethernet and Management Port LED Descriptions
Ethernet LED
Location
State Description
Top (Link)
Off
No power or not connected to network.
On (green)
Connected to network.
Bottom (Act)
Off
No power, not transmitting, or not receiving.
On (amber)
Transmitting or receiving.
10GBASE-T
Ethernet
LED Location
State
Description
Left (Link)
Off
No power, not connected to network, or passive.
On (green)
Connected to network.
Right (Act)
Off
No power, not transmitting, or not receiving.
On (amber)
Transmitting or receiving.
SPF+ Ethernet
LED Location
State Description
Top (Link)
Off
No power, not connected to network, or passive.
On (green)
Connected to network.
Bottom (Act)
Off
No power, not transmitting, or not receiving.
On (amber)
Transmitting or receiving.
Management
LED Location
State Description
Left (Link)
Off
No power or not connected to network.
On (green)
Connected to network (100mbit).
On (amber)
Connected to network (10mbit).
Right (Act)
Off
No power, not transmitting, or not receiving.
On (blinking green)
Transmitting or receiving.
17