Install Guide

Installing the Bezel
Thestepsforinstallingthebezelarethesameforallarraymodels:
1. Hooktherightendofthebezelontotherightsideofthechassis.
2. Swingtheleftendofthebezeltowardtheleftsideofthechassis.
3. Pressthebezelintoplaceuntilthereleaselatchcloses.
4. Usingthekeyprovided,lockthebezelandstorethekeyinasafeplaceasshowninFigure
5.
Figure 5: Installing the Bezel
8
PS4210 Installation Guide 2 Rack Mounting the Array