Install Guide

3. ClickYesinthewarningdialogboxtoopentheConfigureMember–GeneralSettingsdialog
box.
4. SelectthepoolandclickNext.Ifprompted,confirmyouwanttoassignthemembertothe
pool.
5. SelecttheRAIDpolicyontheConfigureMember–RAIDConfigurationdialogbox.
6. (Optional)SelectWait until the member storage initialization completes.
7. ClickNext.
8. ClickFinishintheConfigureMember–Summarydialogbox.
Note: AfterinitialRAIDconfiguration,ittakesafewminutesforGroupManagertodisplaythe
totalusablecapacity.GroupManagermightshowasmalleramountuntiltheprocessis
complete.
22
PS4210 Installation Guide 4 Software Configuration