Users Guide
Remote Setup Wizard Command Line
Interface
The Remote Setup Wizard Command Line Interface (RSWCLI) provides setup commands that you can execute at the Linux command
prompt and a command line interface where you can perform all required setup actions.
Topics:
• General Command Syntax for the RSWCLI
• Configuration — Discovering a PS Series Array
• Initializing a PS Series Array
• Managing Access to a PS Series Group
• Listing Accessible Groups
• Modifying Access to a Group
• Removing Host Access to a Group
• Configuring Multipath I/O
General Command Syntax for the RSWCLI
The general RSWCLI command syntax is as follows:
# rswcli --subcommand | -abbreviated_subcommand [--parameter|
--abbreviated_parameter [argument]]
The following rules apply:
• When spelling out the full subcommand, prefix with a double dash (--). For example, rswcli --list-group.
• Prefix abbreviated subcommands with a dash (‑). For example, rswcli -l.
• When specifying parameters, use a double dash with both full and abbreviated parameter names. For example, --group-name or --
gn.
• Use of the equal sign (=) to specify a value to parameters is optional. For example, --member-name=eqlgroup1 and --member-
name eqlgroup1 are equivalent.
• Brackets ([]) indicate that a parameter or argument is optional.
• Several parameters are mutually exclusive and specifying more than one of these parameters causes the command to fail. The
command parser ignores any redundant parameters.
• To display all applicable parameters, enter an entire subcommand followed by a tab.
• To display a list of applicable options, enter part of any subcommand or parameter followed by two tabs. For information, see Bash
Command Completion.
• To access help on any RSWCLI subcommand, use the --help or -h parameter after specifying the subcommand. For example,
rswcli --discover --help.
Configuration — Discovering a PS Series Array
Use the rswcli --discover (or rswcli -d) command for a list of uninitialized PS Series array serial numbers.
3
Remote Setup Wizard Command Line Interface 23