Donaným Bakýmý
Telif Hakkı 2009 EqualLogic, Inc. Tüm hakları saklıdır. EqualLogic tescilli bir ticari markadır. Dell, Dell Inc.'nin ticari markasıdır. Burada geçen tüm ticari markalar ve tescilli ticari markalar sahiplerinin mülkiyetindedir. Bu belgedeki bilgiler önceden bildirilmeksizin değiştirilebilir. Yazılı izin olmadan herhangi bir şekilde çoğaltılması kesinlikle yasaktır.
İçerik Önsöz .....................................................................................................................v Hedef Kitle ......................................................................................................v Düzen ...............................................................................................................v Belgeler ..........................................................................................................
PS6000 Donanım Bakımı İçerik 4 Güç Kaynağı Modüllerinin Bakımının Yapılması...................................... 4-1 LED'lerin Yorumlanması ............................................................................. 4-1 Arızaların Belirlenmesi ................................................................................ 4-1 Güç Kaynağı ve Soğutma Modülünü Çıkarma ............................................ 4-2 Güç Kaynağı ve Soğutma Modülünü Takma ...............................................
Önsöz Bu el kitabı PS6000 depolama dizilerinin donanımına nasıl bakım yapılacağını açıklar. Her bir dizi çalışırken değiştirilebilir güç kaynağı ve soğutma modülleri, sekiz veya on altı adet RAID korumalı disk ve çift çalışırken değiştirilebilir kontrol modülü ihtiva eder. Bir veya daha fazla PS Series dizisi ile, ölçekten bağımsız olarak, ekonomik ve kullanımı kolay, kendi başına yönetilebilen bir iSCSI veri depolama ağı (SAN) olan bir PS Series grubu oluşturabilirsiniz.
PS6000 Donanım Bakımı Önsöz • Bölüm 3, Kontrol Modüllerinin Bakımının Yapılması, kontrol modüllerinin nasıl takılacağı ve bakımının yapılacağını ve mikro SD kartının değiştirilmesini açıklar. Bu bölüm aynı zamanda yüksek performans ve kullanılırlık için ağ kablolarının kontrol modüllerine nasıl en iyi şekilde takılacağını açıklar. • Bölüm 4, Güç Kaynağı Modüllerinin Bakımının Yapılması, diziye güç ve soğutma sağlayan modüllerin nasıl takılacağını ve çıkarılacağını açıklar.
PS6000 Donanım Bakımı Önsöz Teknik Destek ve Müşteri Hizmetleri Dell destek servisi, PS Series dizileri hakkındaki sorularınızı cevaplamaya hazırdır. Acele hizmet kodunuz varsa, arama yaptığınızda bu kodu hazırda bulundurun. Bu kod Dell’in otomatik destek telefon sisteminin çağrınızı daha doğru yönlendirmesine yardımcı olur. Dell ile İletişim Kurma Dell, çok sayıda çevrimiçi ve telefonla destek ve hizmet seçenekleri sağlar.
PS6000 Donanım Bakımı Önsöz Aşağıdaki web sitelerinden Dell Desteğe erişebilirsiniz: • support.dell.com • support.dell.com/EqualLogic • support.jp.dell.com (yalnızca Japonya) • support.euro.dell.com (yalnızca Avrupa) Garanti Bilgileri PS6000 dizisi garantisi nakliye kutusunun içinde yer alır. Garanti ile ilgili kayıt yaptırmak için support.dell.com/EqualLogic adresini ziyaret edin.
1 Temel Depolama Dizisi Bilgileri Bu bölüm PS6000 depolama dizileri hakkında temel bilgiler ihtiva eder. Dizi Ön ve Arka Panelleri Bir PS6000 dizisinin ön ve arka panelleri aşağıdaki şekillerde gösterilmiştir. Şekil 1-1: PS6000Ön panel Disk sürücülerine önden erişilebilir. Disk sürücüleri hakkında ayrıntılı bilgi almak için bkz. Bölüm 2. PS6000'un arkasında bulunan bileşenler şekil 1-2'de gösterilmiş ve tablo 1-1'de açıklanmıştır.
PS6000 Donanım Bakımı Temel Dizi Bilgileri Şekil 1-2: PS6000 Arka Panel Tablo 1-1: Arka Panel Ayrıntılı Açıklaması Parça Açıklama Güç kaynağı ve soğutma modülleri. Soldan sağa doğru 1 ve 0 olarak numaralandırılmışlardır. Kontrol modülleri. Soldan sağa doğru 1 ve 0 olarak numaralandırılmışlardır. Çalışma paneli LED'i. Dizinin durumu (hata ve uyarı durumları), güç durumu ve konumunu gösteren LED'leri ihtiva eder. Güç kaynağı ve soğutma modülleri üzerindeki güç anahtarları. Dizinin gücünü açar ve kapatır.
PS6000 Donanım Bakımı Temel Dizi Bilgileri Şekil 1-3 dikkat etmenizi gerektiren hatalar ve durumlar hakkında sizi uyaran çalışma paneli LED'lerini gösterir. Tablo 1-2 LED'leri açıklar. Her türlü ciddi problemi dizi servis sağlayıcınıza rapor edin. Dizi LED'leri hakkında bilgi almak için bkz. Disk LED'lerinin Yorumlanması , sayfa: 2-2, Temel Depolama Dizisi Bilgileri , sayfa: 1-1 ve Temel Depolama Dizisi Bilgileri , sayfa: 1-1.
PS6000 Donanım Bakımı Temel Dizi Bilgileri Tablo 1-2: Çalışma Paneli Açıklamaları (Devamı) Öğe Uyarı durum LED'i 1–4 Durum Açıklama Kapalı Güç yok veya normal durumda. Turuncu yanıp sönüyor Aşağıdakilerden bir veya daha fazlası meydana gelmiştir: • RAID seti üzerinde hatalı durumda disk vardır ancak set hala çalışır durumda. • RAID seti (disk bölümü seviyesi) bloklarını kaybetmiş. • Bileşen sıcaklığı bir limite yaklaşmış. • Fan arızalı veya fan RPM değeri limiti aşmış.
PS6000 Donanım Bakımı Temel Dizi Bilgileri Tablo 1-2: Çalışma Paneli Açıklamaları (Devamı) Öğe Kritik hata durumu LED'i Seri numarası etiketi Durum Açıklama Kapalı Güç yok veya normal durumda. Turuncu yanıp sönüyor Aşağıdakilerden bir veya daha fazlası meydana gelmiştir: • RAID çalışmıyor. • Kayıp blok tablosu dolu. • Sıcaklık üst veya alt limiti aşmış. • Kontrol modülü önbelleği veri kaybetmiş. • Bir soğutma modülü takılı değil. • Bir soğutma modülü üzerindeki her iki fan arızalı.
PS6000 Donanım Bakımı Temel Dizi Bilgileri Elektrostatik Bilekliğin Kullanılması Dizi kasası, disk sürücüleri veya kontrol modülleri ile ilgili bir faaliyet yaparken elektrostatik boşalmayı engellemek için elektrostatik bir koruma aygıtı kullanmalısınız. Nakliye kutusunun içerisinde elektrostatik bir bileklik bulunur.
2 Disklerin Bakımının Yapılması Bir PS6000 dizisi 16 adete kadar çalışırken değiştirilebilir Seri Bağlı SCSI (SAS) disk veya Seri ATA (SATA) disk ihtiva eder. Disk bakımı başlıkları SAS ve SATA disklerin her ikisine de uygulanabilir. Çerçeveyi Çıkarma Bir PS6000 içerisindeki disklere erişmek için çerçeveyi çıkarmanız gerekir. Çerçeve üzerinde disklere müdahale edilmesine ve yanlışlıkla çıkarılmasına karşı koruyan bir kilit bulunur. Kilidi açmak ve çerçeveyi çıkarmak için: 1.
PS6000 Donanım Bakımı Disklerin Bakımının Yapılması 3. Çerçeveyi tutun ve çekerek kasadan ayırın. Bkz. şekil 2-3. Şekil 2-3: Çerçevenin Kasadan Ayrılması Disk LED'lerinin Yorumlanması Şekil 2-4 bir PS6000 dizisindeki disklerin nasıl konumlandırıldığını ve numaralandırıldığını gösterir.
PS6000 Donanım Bakımı Disklerin Bakımının Yapılması Bir disk sürücüsünün parçaları şekil 2-5'de gösterilmiş ve tablo 2-1'de açıklanmıştır. Şekil 2-5: Disk Sürücüsü Detayı Tablo 2-1: Disk Detayı Açıklamaları Belirtme çizgisi Renk Disk sürücü kolu serbest bırakma düğmesi Açıklama Siyah SAS disk. Gri SATA disk. Gri SAS ve SATA diskler için aynı. Kapalı Güç yok veya bir hata durumu var. Disk sürücü kolu Güç ve disk eylem Yeşil LED'i. Yanıp sönen yeşil Hata LED'i Güç açık. Disk eylemi.
PS6000 Donanım Bakımı Disklerin Bakımının Yapılması Disk Kullanım Gereksinimleri Diskleri aşağıdaki şekilde kullanın: • Diskleri uygun şekilde depolayın. Değişen diskleri gönderildikleri paket içerisine yerleştirin. Diskleri üst üste dizmeyin veya bir disk üzerine herhangi bir malzeme koymayın. • Diskleri elektrostatik boşlamaya karşı koruyun. Bir disk ile herhangi bir işlem yaparken elektrostatik boşalmadan korunmaması durumunda elektrostatik bileklik takın. • Diskleri dikkatli taşıyın.
PS6000 Donanım Bakımı Disklerin Bakımının Yapılması Bir Disk Arızalandığında Dizinin Davranışı Dizinin bir disk arızasını nasıl ele alacağı, yedek diskin mevcut olup olmamasına ve arızalı diske sahip olan RAID setinin çalışmaya devam edip edemediğine bağlıdır. Örneğin: • Yedek bir disk mevcut ise, bu disk arızalı diskin yerine geçer. Yeniden yapılandırma tamamlandığında performans normale döner.
PS6000 Donanım Bakımı Disklerin Bakımının Yapılması Bir diski çıkarmak için: 1. Tutamağı ayırmak için tutamak serbest bırakma kolunu ok yönünde sola bastırın. 2. Tutamağı kavrayın ve diski yuvadan 2.5 cm (1 inç) dışarı çekin. Bkz. şekil 2-6. Şekil 2-6: Bir Diskin Çıkarılması 3. Kafaların oturması için 30 saniye bekleyin. (Boş bir taşıyıcıyı çıkarırken uygulanmaz.) 4. Diski yuvadan daha fazla dışarıya çekin ve tutamağı ayırın. Bir tık sesi duyacaksınız. Ardından, diski tamamen diziden dışarı çıkarın.
PS6000 Donanım Bakımı Disklerin Bakımının Yapılması Disk Sürücüsü Kurulum Yönergeleri ve Kısıtlamaları • Dizi içerisine sadece aynı tip, hız ve dönme oranındaki diskleri takın. Tutamak serbest bırakma düğmesinin rengi disk tipini belirtir (SAS için siyah, SATA için gri). • Diskin soldaki tutamak serbest bırakma düğmesi ile şekil 2-4'de gösterildiği şekilde konumlandırıldığından emin olun. • Bir dizi içerisinde farklı boyutlarda diskleri kullanabilirsiniz.
PS6000 Donanım Bakımı Disklerin Bakımının Yapılması 3. Tutamak bir açı yapacak şekilde, diski tamamen yuvanın içine doğru kaydırırken aynı anda tık sesi duyana kadar tutamağa bastırın. Bkz. şekil 2-7. Şekil 2-7: Disk Tutamağının Kapatılması Ön panel üzerindeki LED'lere Disk LED'lerinin Yorumlanması, sayfa: 2-2'de açıklandığı şekilde bakarak yeni diskin çalışır durumda olduğundan emin olun.
3 Kontrol Modüllerinin Bakımının Yapılması Bir PS6000 dizisi iki adet çalışırken değiştirilebilir kontrol modülü ihtiva eder. Dizinin çalışmasını için bir kontrol modülünün çalışır durumda olması gerekir. Kontrol modüllerine dizinin arkasından erişebilirsiniz. Her kontrol modülünde çoklu Ethernet portları, bir seri konektör (diziye herhangi bir ağ erişimi olmadığında kullanılması için) ve sahada değiştirilebilir (PS Series ürün bilgisini çalıştıran) bir mikro SD kartı bulunur.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Kontrol Modülü LED'lerinin Yorumlanması Kontrol modülleri aşağıdaki LED'lere sahiptir: • Her kontrol modülünün sol tarafında, kontrol modülü durumunu ve kontrol modülünün aktif mi yoksa ikincil durumda mı olduğunu gösteren üç adet LED bulunur. Bkz. şekil 3-1. • Her Ethernet portunda ağ arabirimi durumunu gösteren iki adet LED bulunur. Bkz. şekil 3-1. Kontrol modülü LED'leri tablo 3-1'de açıklanmıştır.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Tablo 3-2: Ethernet Portu LED Açıklamaları LED Konumu Renk Her portun sol tarafında. Kapalı Yeşil Her portun sağ tarafında. Kapalı Yeşil Açıklama Güç yok veya ağa bağlı değil. Ağa bağlı. Güç yok, gönderme yok veya alma yok. Gönderiyor veya alıyor. Kontrol Modülü Arızalarının Belirlenmesi Bir kontrol modülündeki arızayı aşağıdaki yöntemlerle belirleyebilirsiniz: • LED'ler. Bkz. Kontrol Modülü LED'lerinin Yorumlanması, sayfa: 3-2.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Arıza Davranışının Anlaşılması Aynı anda sadece bir kontrol modülü aktif (ağ trafiğine hizmet sağlar) durumdadır. Her kontrol modülü en son kullanılan verileri depolamak için batarya destekli bir yazma önbelleğine sahiptir. Yedeklilik için, ikincil kontrol modülündeki önbellek aktif kontrol modülündeki önbellekte depolanan verilerin birebir kopyasını tutar.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Kontrol Modülü Ürün Bilgisinin İdamesi Bir PS6000 dizisi, her biri dizi ürün bilgisini çalıştıran bir mikro SD kartına sahip olan iki kontrol modülü ihtiva eder. Yeni ürün özellikleri ve iyileştirmelerinden faydalanmak için en son ürün bilgisi sürümünü kullanmalısınız. Dikkat: Her iki kontrol modülü de aynı ürün bilgisi sürümünü çalıştırmalıdır; aksi takdirde, sadece bir kontrol modülü işlevsel olabilir.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Ağ Yapılandırma Tavsiyeleri Dell aşağıdaki tabloda yer alan yönergeleri takip etmenizi tavsiye etmektedir. Ayrıca, uygun bir ağ yapılandırması için kullanılan genel kurallar grup üyeleri için de geçerlidir. Genel ağ yapılandırması konusu bu el kitabının kapsamı dışındadır.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Tablo 3-3: Ağ ile İlgili Tavsiyeler (Devamı) Tavsiye Açıklama Uç düğüm noktalarını birbirine bağlayan anahtar portlarında STP işlevinin olmaması Mümkünse, uç düğüm noktalarını birbirine bağlayan anahtar portları üzerinde Spanning-Tree (STP - Kapsama Ağacı Protokolü) kullanmayın.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması • Bakır esaslı ağlarda RJ45 konektörlerle Kategori 5E veya Kategori 6 kabloları kullanın. TIA/EIA TSB95 standartlarını karşılaması durumunda Kategori 5 kablo kullanın. • Arabirimleri şu sırada bağlayın: Ethernet 0, Ethernet 1, Ethernet 2 ve Ethernet 3. • Arabirimleri farklı ağ anahtarlarına bağlayın. • Her iki kontrol modülünde minimum olarak ağ kablolarını Ethernet 0'a bağlayın ve ardından kabloları bir ağ anahtarına bağlayın. Bkz.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Şekil 3-3: Tavsiye Edilen Ağ Yapılandırması Kontrol Modülü İşlemleri İçin Gereksinimler Aşağıdaki kontrol modülü işlem gereksinimlerini uygulayın: • Kontrol modüllerini elektrostatik boşalmaya karşı koruyun. Bir kontrol modülüne dokunurken Elektrostatik Bilekliğin Kullanılması, sayfa: 1-6'de açıklandığı gibi her zaman elektrostatik bir bileklik kullanın.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Bir Kontrol Modülünün Çıkarılması Bir kontrol modülü arızalanırsa, modülü çıkarın ve çalışan bir kontrol modülü ile değiştirin. Değiştirmeye hazır olana kadar arızalı bir kontrol modülünü yerinden çıkarmayın. Bir Mikro SD kartını değiştirmek için kontrol modülünü geçici olarak çıkarmanız gerekebilir. Notlar: Uygun soğutmanın sağlanması için, kontrol modülü yuvasını boş bırakmayın.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Bir kontrol modülünü çıkarmak için: 1. Her iki mandalın serbest bırakma mekanizmasına bastırarak ve ardından mandalları dışarı doğru döndürerek kontrol modülü mandallarını açın. Bu işlem kontrol modülünün diziden ayrılmasını sağlayacaktır. Bkz. şekil 3-4. Şekil 3-4: Bir Kontrol Modülü Mandalının Açılması 2. Mandalları tutun ve kontrol modülünü dikkatlice yuvasından dışarı kaydırın. Bkz. şekil 3-5.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Şekil 3-5: Bir Kontrol Modülünün Çıkarılması 3. Kontrol modülünü elektrostatik yükten korunan düz bir yüzey üzerine yerleştirin. Dikkat: Hasar görmesini engellemek için, kontrol modülünün üzerine herhangi bir şey koymayın. 4.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Bir Kontrol Modülünün Takılması Kontrol modülünü diziyi kapatmadan takabilirsiniz. Dikkat: Bir PS6000 dizisindeki kontrol modülü tiplerini karıştırmayın. Bir kontrol modülünü takmadan önce, kontrol modülünün kompakt flaş kartı üzerindeki ürün bilgisinin çalışır durumdaki kontrol modülü üzerindeki ürün bilgisi ile eşleştiğinden emin olun. Bkz. Kontrol Modülü Ürün Bilgisinin İdamesi, sayfa: 3-5.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Şekil 3-7: Bir Kontrol Modülünün Takılması 5. Ağ kablolarını Ağ Kablolarının Takılması, sayfa: 3-7'da açıklandığı şekilde bağlayın. 6. Dizi kapalıysa, diziye gelen gücü açın. 7. LED'leri Kontrol Modülü LED'lerinin Yorumlanması, sayfa: 3-2'de açıklandığı şekilde kontrol edin. Ayrıca, GUI Member Controllers (Üye Denetleyiciler) penceresini kontrol edin veya CLI member select show controllers komutunu çalıştırın.
PS6000 Donanım Bakımı Not: Kontrol Modüllerinin Bakımının Yapılması Bağlandığında, kontrol modülü önbellek pili şarj olmaya başlayabilir. Düşük pil emniyetli önbellek politikası etkin durumda ise (varsayılan) önbellek pili tamamen dolana kadar dizi içe yazma modunda çalışır.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Mikro SD Kartının Çıkarılması 1. Yay mekanizmasının serbest kalması için kartı yuvasına sıkıca bastırın (şekil 3-8). Mikro SD kartı kısmen yuvasından dışarı çıkacaktır. Şekil 3-8: Mikro SD Kartının Çıkarılması 2. Kartı düzgün şekilde yuvasından dışarı doğru nazikçe çekin. 3. Mikro SD kartını elektrostatik yükten korunan düz bir yüzey üzerine yerleştirin.
PS6000 Donanım Bakımı Kontrol Modüllerinin Bakımının Yapılması Mikro SD Kartının Takılması 1. Takılacak olan mikro SD kartını üzerindeki ok yuvasını gösterecek şekilde yuvaya hizalayın. Bkz. şekil 3-9. 2. Yerine oturana kadar kartı yuvanın içine doğru sıkıca bastırın. Dışarı çekilemediğinden emin olun. Şekil 3-9: Mikro SD Kartının Takılması 3. Kontrol modülünü takın. Bkz. Bir Kontrol Modülünün Takılması, sayfa: 3-13.
PS6000 Donanım Bakımı 3–18 Kontrol Modüllerinin Bakımının Yapılması
4 Güç Kaynağı Modüllerinin Bakımının Yapılması Bir PS6000 dizisi iki adet çalışırken değiştirilebilir, birleşik güç kaynağı ve soğutma modülü ihtiva eder. LED'lerin Yorumlanması Modül durumunu belirlemek ve problemleri tanımlamak için şekil 4-1'de gösterilen ve tablo 4-1'de açıklanan güç kaynağı ve soğutma modülü LED'lerini kullanın. Güç kaynağı ve soğutma modülü LED'leri güç, fan ve dizi durumlarını gösterir.
PS6000 Donanım Bakımı Güç Kaynağı Modüllerinin Bakımının Yapılması Arızaların Belirlenmesi Bir güç kaynağı ve soğutma modülü arızasını aşağıdakilerden herhangi biri veya tamamını kullanarak belirleyebilirsiniz: • LED'ler. Bkz. LED'lerin Yorumlanması, sayfa: 4-1. • Mesajlar. Konsol, olay günlüğü veya Group Manager GUI Alarms (Grup Yöneticisi GUI Alarmları) panelindeki mesaj bir güç kaynağı ve soğutma modülü arızasını açıklar. • Group Manager (Grup Yöneticisi) GUI ve CLI çıktısı.
PS6000 Donanım Bakımı Güç Kaynağı Modüllerinin Bakımının Yapılması 2. Güç kablosu tutma kolunu ayırın ve güç kablosunu çıkarın. 3. Bkz. şekil 4-2. Kolu serbest bırakmak için mandalları içeri doğru bastırın ( ve ardından kolu yukarı doğru döndürün ( ). ) Şekil 4-2: Kolun Serbest Bırakılması 4. Kolu tutun ve modülü yuvasından çekin. Bkz. şekil 4-3. Dikkat: Modül ağırdır; iki elinizle destekleyin.
PS6000 Donanım Bakımı Güç Kaynağı Modüllerinin Bakımının Yapılması Güç Kaynağı ve Soğutma Modülünü Takma Dikkat: Modül ağırdır; iki elinizle destekleyin. Bir diziye güç kaynağı ve soğutma modülünü takmak için: 1. Elektrostatik Bilekliğin Kullanılması, sayfa: 1-6'de açıklandığı gibi, elektrostatik bir bileklik takın. 2. Bkz. şekil 4-2. Kolu serbest bırakmak için mandalları içeri doğru bastırın ( ve ardından kolu yukarı doğru döndürün ( ). ) 3.
PS6000 Donanım Bakımı Not: Güç Kaynağı Modüllerinin Bakımının Yapılması Güç kablosu yapılandırmanız için kablo sabitleme kolunu ters çevirmeniz gerekirse, teli güç prizi soketinden ayırmak için şekil 4-5'de gösterildiği gibi telin uçlarına bastırın. Teli ters çevirin ve sokete geri takın. Şekil 4-5: Kablo Sabitleme Kolunun Kullanılması 7. Güç kaynağı ve soğutma modülüne gelen gücü açın. Başlatma işlemi genellikle bir ila on saniye sürer.
A Çevresel, Güç ile ilgili ve Diğer Belirtimler Tablo A-1 bir PS6000 dizisi için çevresel, güç ile ilgili ve fiziksel belirtimleri açıklar. Tablo A-1: PS6000 Dizisi Belirtimleri Bileşen Gereksinim Tamamen dolu dizinin ağırlığı 35 kg (77.
Dizin A B ağ belirtimler, dizi A-1 bir dizinin kapatılması 1-6 arıza koruma 3-4 bağlantı yönergeleri 3-5 kablo bağlantılar 3-7 kullanılırlığın artırılması 3-7 maksimum bant genişliği 3-8 maksimum kullanılabilirlik 3-8 minimum yapılandırma 3-7 performansın artırılması 3-5, 3-7 tavsiyeler 3-5 ağ arabirimleri bağlantının yapılması 3-7 LED'ler 3-2 yapılandırma 3-5 Akış Denetim tavsiyesi 3-6 ana makineler Akış Denetim tavsiyesi 3-6 Jumbo Frames (Büyük Çerçeveler) tavsiyesi 3-6 anahtarlar, tavsiyeler Akış Den
PS6000 Donanım Bakımı kontrol modülleri 3-1 kontrol modülü kısıtlaması 3-11 LED'ler 1-3, 2-2, 3-2, 4-1 maksimum ağ bant genişliği 3-8 maksimum ağ kullanılabilirliği 3-8 minimum ağ yapılandırması 3-7 ön panel 1-1 piller 3-1 seri numarası 1-2, 1-5 soğutma 4-1 ürün bilgisi 3-4 durum kontrol modülleri 3-3 Dizin elektrostatik koruma, kullanım 1-5 ürün bilgisi 3-4 Gigabit Ethernet tavsiyesi 3-5 güç kabloları kısıtlama 4-4 güç kaynakları arıza göstergeleri 4-1 başlatma 4-5 bakım 4-1 çalışma durumunun doğrulanm
PS6000 Donanım Bakımı senkronize etme 3-8, 3-9 türleri 3-1, 3-11 ürün bilgisi gereksinimleri 3-4, 3-12, 3-14 ürün bilgisi tanımlama 3-4 uygun kurulumun kontrol edilmesi 3-13 yer belirleme 3-3 yük devretme davranışı 3-3 künye, seri numarası 1-2 L LED'ler ağ arabirimleri 3-2 çalışma paneli 1-3 diskler 2-2 güç kaynakları 4-1 kontrol modülü 3-2 soğutma modülleri 4-1 M mikro SD kartı değiştirme 3-4, 3-5, 3-14 taşıma 3-11 ürün bilgisi gereksinimleri 3-4 ürün bilgisinin belirlenmesi 3-4 P piller şarj etme 3-13