Copyright 2009 Dell, Inc. Alle Rechte vorbehalten. Dell ist eine Marke von Dell, Inc. EqualLogic ist eine eingetragene Marke. Alle hierin genannten Marken und eingetragenen Marken befinden sich im Besitz der jeweiligen Eigentümer. Irrtümer und technische Änderungen vorbehalten. Nachdrucke jeglicher Art ohne die vorherige schriftliche Genehmigung von Dell sind strengstens untersagt.
Inhalt Einleitung ............................................................................................................ iii Zielgruppe ..................................................................................................... iii Gliederung ..................................................................................................... iii Übersicht über die Dell EqualLogic-Software ...............................................iv Zugehörige Dokumentation ............................
PS6010 Hardwarewartung Inhalt Austauschen eines Steuermoduls ................................................................. 3-6 Steuermodul entfernen........................................................................... 3-6 Steuermodul einsetzen........................................................................... 3-9 Austauschen der Mikro-SD-Karte.............................................................. 3-11 Entfernen der Mikro-SD-Karte...................................................
Einleitung In diesem Handbuch wird die Wartung der Hardware für PS6010-Speicherarrays beschrieben. Jedes Array ist mit hot-swap-fähigen Netzteil- und Lüftermodulen, acht oder sechzehn RAID-geschützten Laufwerken und einem oder zwei hotswap-fähigen Steuermodulen ausgestattet. Mit einem oder mehreren PS-Reihe-Arrays lässt sich eine PS-Reihe-Gruppe einrichten – ein selbstverwaltendes iSCSI-Speicherbereichsnetzwerk (SAN), das unabhängig von der Skalierung kostengünstig und einfach zu handhaben ist.
PS6010 Hardwarewartung Einleitung • Kapitel 3, Wartung von Steuermodulen, beschreibt den Einbau und die Wartung von Steuermodulen. Außerdem wird erklärt, wie Netzwerkkabel am besten mit Steuermodulen verbunden werden, um die Leistung und Verfügbarkeit zu optimieren. • Kapitel 4, Wartung der Netzteilmodule, beschreibt den Einbau und das Entfernen der Module, die das Array mit Strom versorgen und kühlen.
PS6010 Hardwarewartung Einleitung Host-Software für Windows • Host-Integrationstools - Remote-Setup-Assistent (RSW): Initialisiert neue PS-Arrays, konfiguriert Host-Verbindungen zu Gruppen der PS-Reihe und konfiguriert und verwaltet Multipathing. - Gerätespezifisches Modul für Multipfad-E/A (MPIO DSM): Umfasst ein Verbindungserkennungsmodul, das den Netzwerklastausgleich der PS-Reihe versteht und Host-Verbindungen zu Volumes der PS-Reihe bereitstellt.
PS6010 Hardwarewartung Einleitung Zugehörige Dokumentation Ausführliche Informationen zu PS-Arrays, Gruppen, Volumes, Array-Software und Host-Software finden Sie in der folgenden Dokumentation: vi
PS6010 Hardwarewartung Einleitung Technische Unterstützung und Kundendienst Der Support-Service von Dell steht zu Ihrer Verfügung, um Fragen über SANArrays der PS-Reihe zu beantworten. Wenn Sie über einen Express-Servicecode verfügen, halten Sie diesen beim Anruf bereit. Mit diesem Code werden Sie innerhalb des automatischen Support-Telefonsystems schneller verbunden. Kontaktaufnahme mit Dell Dell bietet verschiedene Optionen für Support und Service online oder per Telefon.
PS6010 Hardwarewartung Einleitung Online-Dienste Auf den folgenden Websites erfahren Sie mehr über die Produkte und Dienstleistungen von Dell: • www.dell.com • www.dell.com/ap (nur Asien/Pazifik) • www.dell.com/jp (nur Japan) • www.euro.dell.com (nur Europa) • www.dell.com/la (Lateinamerika) • www.dell.ca (nur Kanada) Sie können den Support von Dell über folgende Websites erreichen: • support.dell.com • support.dell.com/EqualLogic • support.jp.dell.com (nur Japan) • support.euro.dell.
1 Grundlegende Informationen zum Speicherarray Dieses Kapitel enthält grundlegende Informationen über PS6010-Speicherarrays. Vorder- und Rückseite des Arrays Die Vorderseite eines PS6010-Arrays wird in Abbildung 1-1 und Abbildung 1-2 gezeigt. Abbildung 1-1: PS6010-Vorderseite (mit Blende) Abbildung 1-2: PS6010-Vorderseite (ohne Blende) Die Laufwerke sind nach Entfernen der Blende über die Vorderseite zugänglich. Siehe Kapitel 2 für ausführliche Informationen über Laufwerke.
PS6010 Hardwarewartung Grundlegende Array-Informationen Abbildung 1-3: PS6010 Rückseite Tabelle 1-1: Ausführliche Beschreibung der Rückseite Bauteil Beschreibung Netzteil- und Lüftermodule. Das Modul auf der rechten Seite ist das Modul 0, und das Modul auf der linken Seite ist das Modul 1. Steuermodule. Das Modul auf der rechten Seite ist das Modul 0, und das Modul auf der linken Seite ist das Modul 1. LED für Betriebsanzeige.
PS6010 Hardwarewartung Grundlegende Array-Informationen Informationen über andere Array-LEDs finden Sie in den Abschnitten Bedeutung der Laufwerk-LEDs auf Seite 2-2, Bedeutung der Steuermodul-LEDs auf Seite 3-1 und Bedeutung der LED-Anzeigen auf Seite 4-1. Abbildung 1-4: Betriebsanzeige Tabelle 1-2: Beschreibungen der Betriebsanzeige Hinweis Bauteil Farbe Beschreibung LED für Stromversorgung Aus Keine Stromversorgung. Grün Stromversorgung.
PS6010 Hardwarewartung Grundlegende Array-Informationen Tabelle 1-2: Beschreibungen der Betriebsanzeige (Fortsetzung) Hinweis Bauteil Farbe Beschreibung LED für schwerwiegenden Fehlerzustand Aus Keine Stromversorgung oder Normalbetrieb. Orange blinkend Siehe Bedingungen für LED-Anzeige im schwerwiegenden Fehlerzustand auf Seite 1-5. Etikett mit Seriennummer - Dieses Etikett zeigt die Seriennummer Ihres Arrays.
PS6010 Hardwarewartung Grundlegende Array-Informationen Bedingungen für LED-Anzeige im schwerwiegenden Fehlerzustand Wenn die LED für schwerwiegenden Fehlerzustand orange blinkt, ist eine oder mehrere der folgenden Bedingungen aufgetreten: • RAID funktioniert nicht. • Tabelle verlorener Blocks ist voll. • Temperatur überschreitet oberen oder unteren Grenzwert. • Steuermodulcache hat Daten verloren. • Kein Lüftermodul installiert. • Beide Lüfter in einem Lüftermodul sind ausgefallen.
PS6010 Hardwarewartung Grundlegende Array-Informationen Abbildung 1-5: Erdungsmanschette verwenden 2. Legen Sie das Band eng um Ihr Handgelenk an. 3. Verbinden Sie den Bananenstecker mit der Erdung oder bringen Sie die Krokodilklemme an einem geerdeten Gerät an, z. B. einer ESD-Matte oder dem Metallrahmen eines geerdeten Geräts. Herunterfahren und Neustarten eines Arrays Ein PS6010-Array umfasst redundante, hot-swap-fähige Laufwerke, Netzteile und Steuermodule (bei einem Array mit zwei Steuermodulen).
PS6010 Hardwarewartung Grundlegende Array-Informationen Stellen Sie sicher, dass die Merkmale des seriellen Kabels mit den folgenden Merkmalen übereinstimmen: - 9600 Baud 1 Stoppbit Keine Parität 8 Datenbits Keine Flusskontrolle 2. Melden Sie sich bei einem Benutzerkonto mit Lese-/Schreibzugriff an, etwa grpadmin. 3. Geben Sie wie dargestellt den Befehl shutdown ein. login: grpadmin Password: Welcome to Group Manager Copyright 2001-2009 Dell, Inc.
2 Wartung der Laufwerke Das Array enthält bis zu 16 hot-swap-fähige Laufwerke, entweder in der Version „Serial Attached SCSI (SAS)“ oder „Serial ATA (SATA)“. Die Abschnitte zur Wartung von Laufwerken gilt sowohl für SAS- als auch für SATA-Laufwerke. Identifizieren von fehlerhaften Laufwerken Ein Laufwerkfehler zeigt sich wie folgt: • LEDs auf dem Laufwerk. Siehe Bedeutung der Laufwerk-LEDs auf Seite 2-2.
PS6010 Hardwarewartung Wartung von Laufwerken Bedeutung der Laufwerk-LEDs Abbildung 2-1 zeigt die Anordnung von Laufwerken und deren Reihenfolge/ Nummerierung im Array an. Abbildung 2-1: Laufwerknummerierung Die Laufwerkkomponenten werden in Abbildung 2-2 gezeigt und in Tabelle 2-1 beschrieben. Abbildung 2-2: Laufwerk (Detail) Tabelle 2-1: Laufwerke – Detaillierte Beschreibung Hinweis Bauteil Farbe Entriegelungstaste des Schwarz Laufwerkgriffs Grau 2-2 Beschreibung SAS-Laufwerk. SATA-Laufwerk.
PS6010 Hardwarewartung Wartung von Laufwerken Tabelle 2-1: Laufwerke – Detaillierte Beschreibung (Fortsetzung) Hinweis Bauteil Fehler-LED Farbe Beschreibung Aus Keine Stromversorgung oder Normalbetrieb. Rot Fehlerzustand. Anforderungen an die Laufwerkverwendung Verwenden Sie die Laufwerke wie folgt: • Achten Sie auf eine ordnungsgemäße Lagerung der Laufwerke. Lagern Sie Austauschlaufwerke in der Lieferverpackung.
PS6010 Hardwarewartung Wartung von Laufwerken Austauschlaufwerk geliefert wurde. Das Versenden von Laufwerken in einer nicht zugelassenen Verpackung kann die Garantie erlöschen lassen. Anweisungen und Beschränkungen für den Laufwerkeinbau • Ersetzen Sie ein defektes Laufwerk so bald wie möglich, um höchste Verfügbarkeit zu gewährleisten. • Bauen Sie nur Laufwerke des gleichen Typs, also mit identischer Leistung, Geschwindigkeit und Drehzahl, in einem Array ein.
PS6010 Hardwarewartung Wartung von Laufwerken Austauschen von Laufwerken Der Vorgang zum Austauschen eines defekten Festplattenlaufwerks läuft im Allgemeinen folgendermaßen ab: 1. Entfernen Sie die Frontblende. 2. Entfernen Sie das defekte Laufwerk. 3. Setzen Sie das Ersatzlaufwerk ein. 4. Bringen Sie die Frontblende wieder an. Die folgenden Abschnitte beschreiben jeden Schritt ausführlich.
PS6010 Hardwarewartung Wartung von Laufwerken Abbildung 2-4: Blendenentriegelung nach oben drücken 3. Halten Sie die Blende fest und ziehen Sie sie vom Gehäuse ab. Siehe Abbildung 2-5. Abbildung 2-5: Blende vom Gehäuse abziehen Entfernen eines Laufwerks 1. Tragen Sie beim Handhaben eines Laufwerks elektrostatischen Schutz. Siehe Erdungsmanschette verwenden auf Seite 1-5. 2. Drücken Sie die Entriegelungstaste des Griffs nach links in Pfeilrichtung, um den Griff zu lösen.
PS6010 Hardwarewartung Wartung von Laufwerken 3. Umfassen Sie den Griff und ziehen Sie das Laufwerk etwa 2 bis 3 cm aus dem Steckplatz heraus. Siehe Abbildung 2-6. Abbildung 2-6: Entfernen eines Laufwerks 4. Warten Sie 30 Sekunden, dass die Schreib-/Leseköpfe in die Transportposition fahren können. (Gilt nicht beim Entfernen eines Platzhalters.) 5. Ziehen Sie das Laufwerk weiter aus dem Steckplatz heraus und rasten Sie den Griff wieder ein. Beim Einrasten hört man ein Klicken.
PS6010 Hardwarewartung Wartung von Laufwerken Ein Laufwerk einsetzen 1. Tragen Sie beim Handhaben eines Laufwerks elektrostatischen Schutz. Siehe Erdungsmanschette verwenden auf Seite 1-5. So setzen Sie ein Laufwerk oder einen Platzhalter ein: 1. Halten Sie das Laufwerk an den Kunststoffhaltern, mit der Griffentriegelungstaste nach links. Schieben Sie dann das Laufwerk ein Stück weit in den Steckplatz. 2. Drücken Sie die Entriegelungstaste des Griffs, um den Griff zu lösen. Öffnen Sie den Griff. 3.
PS6010 Hardwarewartung Wartung von Laufwerken Überprüfen Sie die Funktion des neuen Laufwerks anhand der LEDs auf der Vorderseite, wie unter Bedeutung der Laufwerk-LEDs auf Seite 2-2 beschrieben. Überprüfen Sie darüber hinaus das Fenster „GUI Member Disks“ und die Ausgabe des CLI-Befehls „member select show disks“. Befestigen der Blende Nachdem Sie alle Austauschlaufwerke oder Platzhalter installiert haben, bringen Sie die Frontblende wieder an, und verriegeln Sie sie. 1.
3 Wartung von Steuermodulen Ein PS6010-Array beinhaltet ein oder zwei hot-swap-fähige Steuermodule Typ 10. Der Arraybetrieb erfordert ein funktionierendes Steuermodul. Sie können die Steuermodule von der Rückseite des Arrays aus erreichen.
PS6010 Hardwarewartung Wartung von Steuermodulen • Der Verwaltungs-Port hat zwei eingebaute LED-Anzeigen, die den Zustand der Verwaltungsschnittstelle anzeigen. Siehe Tabelle 3-2 und Angabe 2 in Abbildung 3-1. • Ethernet-Ports 0 und 1 haben jeweils zwei LED-Anzeigen, bezeichnet mit ACT und LNK, die den Zustand der Netzwerkschnittstelle anzeigen. Siehe Tabelle 3-2 und Angabe 3 in Abbildung 3-1.
PS6010 Hardwarewartung Wartung von Steuermodulen Tabelle 3-2: Beschreibung der LED-Anzeigen des Verwaltungs-Ports LED-Position Farbe Beschreibung Links (siehe Erklärung 2) Aus Keine Stromversorgung oder nicht mit dem Netzwerk verbunden. Grün Mit dem Netzwerk verbunden. Aus Kein Strom, kein Senden oder Empfang. Grün Senden oder Empfangen. Rechts (siehe Erklärung 2) Tabelle 3-3: Beschreibung der LED-Anzeigen von Ethernet-Port 0 und 1 LED-Name Farbe Beschreibung ACT (siehe Erklärung 3).
PS6010 Hardwarewartung Wartung von Steuermodulen Failover-Verhalten Bei einem Array mit zwei Steuermodulen ist immer nur ein Steuermodul aktiv (für Netzwerkdatenverkehr). Jedes Steuermodul enthält einen batteriegepufferten Schreib-Cache zum Speichern von kürzlich verwendeten Daten. Aus Redundanzgründen spiegelt der Cache des sekundären Steuermoduls die Daten im Cache des aktiven Steuermoduls.
PS6010 Hardwarewartung Wartung von Steuermodulen Gruppenmitglieder sollten über die gleiche Firmwareversion verfügen; andernfalls stehen der Gruppe nur die Funktionen zur Verfügung, die allen Versionen gemeinsam sind. Informationen über gemischte Firmware-Gruppen finden Sie in den „PS Series Release Notes“ (Versionshinweisen zur PS-Reihe).
PS6010 Hardwarewartung Wartung von Steuermodulen Austauschen eines Steuermoduls Wenn ein Steuermodul ausfällt, entfernen und ersetzen Sie es durch ein funktionierendes Steuermodul. Entfernen Sie das beschädigte Modul nicht, bevor Sie es austauschen können. Gegebenenfalls müssen Sie vorübergehend ein Steuermodul entfernen, um dessen Mikro-SD-Karte zu ersetzen. Anmerkung: Um ordnungsgemäße Kühlung zu gewährleisten, darf ein Steuermodulschacht nicht leer bleiben.
PS6010 Hardwarewartung Wartung von Steuermodulen So entfernen Sie ein Steuermodul: 1. Öffnen Sie die Verschlüsse am Steuermodul, indem Sie den Öffnungsmechanismus zusammendrücken und die Verschlüsse nach außen drehen. So wird das Steuermodul vom Array getrennt. Siehe Abbildung 3-2. Abbildung 3-2: Öffnen eines Steuermodulverschlusses 2. Halten Sie die Verschlüsse fest und ziehen Sie das Steuermodul vorsichtig aus dem Schacht. Siehe Abbildung 3-3.
PS6010 Hardwarewartung Wartung von Steuermodulen Abbildung 3-3: Steuermodul entfernen 3. Legen Sie das Steuermodul auf einer ebenen Fläche mit Schutz vor elektrostatischer Ladung ab. Vorsichtshinweis: Legen Sie nichts auf das Steuermodul, um Schäden zu vermeiden. 4. Wenn Sie ein ausgefallenes Steuermodul ersetzen, entfernen Sie die MikroSD-Karte aus dem defekten Steuermodul und installieren Sie sie im neuen Steuermodul.
PS6010 Hardwarewartung Wartung von Steuermodulen Steuermodul einsetzen Sie können ein Steuermodul einsetzen, ohne das Array herunterzufahren. Vorsichtshinweis: Die Steuermodultypen dürfen in einem Array nicht gemischt eingesetzt werden. Steuermodule werden vertikal in einem Array eingesetzt, mit dem Verriegelungsmechanismus zum angrenzenden Netzteil- und Lüftermodul ausgerichtet. Siehe Abbildung 3-4. Abbildung 3-4: Richtige Ausrichtung der Steuermodule So setzen Sie ein Steuermodul ein: 1.
PS6010 Hardwarewartung Wartung von Steuermodulen Abbildung 3-5: Steuermodul installieren 5. Drehen Sie jeden Riegel nach innen und schieben Sie dabei das Steuerungsmodul ganz in den Steckplatz. Die Riegel werden einrasten (Abbildung 3-5). 6. Schließen Sie die Netzwerkkabel an. Für weitere Informationen siehe die Anleitung zu Installation und Setup. 7. Schalten Sie dann die Stromversorgung des Arrays ein, falls sie ausgeschaltet war. 8. Stellen Sie sicher, dass das Steuermodul betriebsbereit ist.
PS6010 Hardwarewartung Wartung von Steuermodulen rieladestand aktiviert ist (Standardeinstellung), arbeitet das Array im Durchschreib-Modus, bis der Cache-Akku komplett geladen ist. Wenn Sie jedoch die volle Leistung benötigen, bevor der Akku vollständig geladen ist, können Sie die Schutzrichtlinie für niedrigen Akkuladestand beim Akkustatus „good/charging“ (gut/ laden) vorübergehend deaktivieren und somit das Array zwangsweise in den Rückschreib-Modus versetzen.
PS6010 Hardwarewartung Wartung von Steuermodulen Vorsichtshinweis: Achten Sie darauf, die Platine nicht zu beschädigen. Verwenden Sie zum Entfernen der Karte keine scharfen Werkzeuge. Entfernen der Mikro-SD-Karte 1. Drücken Sie die Karte fest in ihre Halterung, um den Federmechanismus auszulösen (Abbildung 3-6). Die Mikro-SD-Karte wird ein Stück weit aus der Halterung geschoben. Abbildung 3-6: Auswerfen der Mikro-SD-Karte 2. Ziehen Sie die Karte vorsichtig gerade aus der Halterung heraus. 3.
PS6010 Hardwarewartung Wartung von Steuermodulen Einsetzen der Mikro-SD-Karte 1. Richten Sie die Mikro-SD-Karte so aus, dass der Pfeil auf der Karte zum Gehäuse (Abbildung 3-7) hin zeigt. 2. Drücken Sie die Karte fest in das Gehäuse, bis sie einrastet. Vergewissern Sie sich, dass sie sich nicht herausziehen lässt. Abbildung 3-7: Einsetzen der Mikro-SD-Karte 3. Installieren Sie das Steuermodul. Siehe Steuermodul einsetzen auf Seite 3-9.
PS6010 Hardwarewartung Wartung von Steuermodulen Überzeugen Sie sich nach dem Einsetzen der Mikro-SD-Karte von der Funktionsfähigkeit des Steuermoduls. Siehe Bedeutung der Steuermodul-LEDs auf Seite 31. Netzwerkanforderungen und Empfehlungen Die Mindestkonfiguration eines Netzwerks für ein PS-Array ist eine Verbindung zwischen Ethernet 0 an jedem Steuermodul und einem Computer oder einem Netzwerk-Switch.
PS6010 Hardwarewartung Wartung von Steuermodulen Tabelle 3-4: Empfehlungen für das Netzwerk (Fortsetzung) Empfehlung Beschreibung Zugang zur IP-Adresse Bei einer Gruppe mit mehreren Subnetzen sollte jede konfiguder Gruppe rierte Netzwerkschnittstelle über Zugang zu dem Subnetz verfügen, auf dem sich die IP-Adresse der Gruppe befindet.
PS6010 Hardwarewartung Wartung von Steuermodulen Anschließen von Netzwerkkabeln Das Steuermodul vom Typ 10 kann über die SFP+-Schnittstelle mit Kupferkabeln oder optischen 10 GE-Kabeln verbunden werden. Module und Kabel für Arrays der PS-Reihe sind separat erhältlich. Siehe Tabelle 2-3 für unterstützte Typen von Netzwerkkabeln. Jedes Steuermodul verfügt über zwei 10 GE-Netzwerkschnittstellenports, die mit „Ethernet 0“ und „Ethernet 1“ gekennzeichnet sind.
PS6010 Hardwarewartung Wartung von Steuermodulen Abbildung 3-8: Empfohlene Konfiguration mit einzelnem Steuermodul Schließen Sie bei einem Array mit zwei Steuermodulen die Netzwerkkabel bei beiden Steuermodulen mindestens an Ethernet 0 an, und verbinden Sie die Kabel anschließend mit einem Netzwerk-Switch. Siehe Abbildung 3-9.
PS6010 Hardwarewartung Wartung von Steuermodulen Empfohlene Netzwerkkonfiguration Für maximale Bandbreite und Verfügbarkeit empfiehlt Dell, vier Netzwerkkabel zu verwenden, um Ethernet 0 und Ethernet 1 von beiden Steuermodulen an verschiedene Switches anzuschließen. Die Switches müssen über Interswitch-Verknüpfungen mit ausreichender Bandbreite verbunden werden. Zusätzlich können Sie wahlweise ein dediziertes Verwaltungsnetzwerk konfigurieren.
PS6010 Hardwarewartung Wartung von Steuermodulen Abbildung 3-11: Konfiguration mit Verwaltungsnetzwerk 3-19
4 Wartung der Netzteilmodule Das Array umfasst zwei hot-swap-fähige, kombinierte Netzteil- und Lüftermodule. Bedeutung der LED-Anzeigen Mit den LEDs des Netzteil- und Lüftermoduls, dargestellt in Abbildung 4-1 und erläutert in Tabelle 4-1, können Sie den Modulstatus bestimmen und Probleme identifizieren. Die LEDs der Netzteil- und Lüftermodule zeigen den Stromversorgungs-, Lüfter- und Array-Status an.
PS6010 Hardwarewartung • Wartung der Netzteilmodule Gruppenmanager GUI und CLI-Ausgabe. Das Fenster „GUI Member Enclosure“ oder der CLI-Befehl „member select show enclosure“ zeigen einen Fehler des Netzteil- und Lüftermoduls. Anmerkung: Wenn Sie die Rückseite des Arrays betrachten, befindet sich Netzteil 0 auf der rechten Seite und Netzteil 1 auf der linken Seite. Details finden Sie in Abbildung 1-3 auf Seite 1-2.
PS6010 Hardwarewartung Wartung der Netzteilmodule Abbildung 4-2: Lösen des Griffs 4. Halten Sie den Griff und ziehen Sie das Modul aus dem Steckplatz. Siehe Abbildung 4-3. Vorsichtshinweis: Das Modul ist schwer; fassen Sie es mit beiden Händen.
PS6010 Hardwarewartung Wartung der Netzteilmodule Ein Netzteil- und Lüftermodul einsetzen Vorsichtshinweis: Das Modul ist schwer; fassen Sie es mit beiden Händen. So setzen Sie ein Netzteil- und Lüftermodul in ein Array ein: 1. Legen Sie eine Erdungsmanschette an, wie beschrieben im Abschnitt Erdungsmanschette verwenden auf Seite 1-5. 2.
PS6010 Hardwarewartung Wartung der Netzteilmodule 5. Schließen Sie das Netzkabel an das Modul an. Wenn das PS-Reihe-Array mit einem Stromversorgungskabel geliefert wurde, verwenden Sie dieses Kabel, um die Sicherheitsbestimmungen zu erfüllen. 6. Verwenden Sie die Kabelzugentlastung, um das Stromversorgungskabel wie in Abbildung 4-5 abgebildet am Array zu sichern.
PS6010 Hardwarewartung Wartung der Netzteilmodule Vorsichtshinweis: Warten Sie nach dem Einsetzen eines Netzteil- und Lüftermoduls, bis das neue Modul initialisiert wurde, bevor Sie das andere Modul entfernen. Die Initialisierung eines neuen Moduls dauert zwischen einer und zehn Sekunden. Wenn die Initialisierung abgeschlossen ist, ist die StromversorgungsLED grün und eine Ereignismeldung gibt an, dass die Lüfter mit normaler Geschwindigkeit arbeiten.
A Umgebungsbedingungen, elektrische Anschlusswerte und andere technische Daten Tabelle A-2 enthält die Umgebungsbedingungen, die elektrischen Anschlusswerte sowie die physischen Daten für ein PS6010-Array.
Stichwortverzeichnis A B Akkus Wartung 1 Akkus laden 11 Akkus.
PS6010 Hardwarwartung K Kabel (Stromversorgung) anschließen 5 Kabelzugentlastung verwenden 5 Kühlung Betriebsstatus überprüfen 5 Initialisierung 6 Kühlung einsetzen 4 Kühlung entfernen 2 L Laufwerke Anforderungen für die Handhabung 3 aus Array entfernen 5 Betriebszustand überprüfen 9 Fehleranzeigen 1 Fehlerverhalten 1 in Array einsetzen 8 LEDs 2 Position 1 SAS 1 SATA 1 schützen 3 Typ identifizieren 2 Typen 1 LEDs Betriebsanzeigefeld 2 Fehleranzeigen Array 2 Laufwerke 2 Lüftermodule 1 Netzteile 1 Netzwerks
PS6010 Hardwarwartung S SAS-Laufwerke identifizieren 2 SATA-Laufwerke identifizieren 2 Status Steuermodule 3 Steuermodule Akkus 1 Anforderungen für die Handhabung 5 Betriebsstatus überprüfen 10 Cacheakku laden 11 Einschränkung für gemeinsamen Einsatz 9 Einschränkungen 1 Failover-Verhalten 4 Fehleranzeigen 3 Firmware-Anforderungen 4 Firmwareversion 4 Funktionen 1 korrekte Installation überprüfen 10 LEDs 1 Position 3 Stichwortverzeichnis Synchronisieren 5, 6 Typen 9 unterstützter Laufwerktyp 9 Steuermodule