Install Guide

PS6210 Install and SetupGuide

3 Connecting the Array Cables

Figure 6: Connecting the AC Power Cables (2U Array)

Figure 7: Connecting the AC Power Cables (4U Array)

Connect the Array to the Network

ThePS6210arraymodelincludestwoType15controlmodules.EachType15controlmoduleincludestwo

10Gbase-Tportsandtwo10GbeSFP+ports.Ofeachpair,oneislabeledEthernet0andtheotherislabeled

Ethernet1.

Note: Opticalcablestransmitdatathroughpulsesoflight.Itisveryimportanttorouteallopticalcableswithno

morethana4-inchbendradiusatanypointbetweenthearrayandtheswitch.

Onefunctioningnetworkconnectionisrequiredforarrayoperation.SeeMinimum and Recommended Cable

Configurations on page 10.