Release Notes

Dell EqualLogic Multipathing Extension Module
Version 1.7 Release Notes
Current Version: 1.7
Release Date: 2020-04
Previous Version: 1.6
Topics:
Revision History
Installation Prerequisites
New and Changed Features
Unsupported VMware Environments
Changing the Multipathing Setting After Adding PE Targets
Using the EqualLogic Plugin with HBAs
Known Issues
Installation
Contacting Dell
This document contains important product information and restrictions for the Dell EqualLogic Multipathing Extension Module (MEM).
Revision History
Revision
Date Description
R1 April 2020 Version 1.7 initial release
Installation Prerequisites
The following table lists the minimum revisions of software and firmware that is required for supporting the installation of the Dell
EqualLogic MEM:
Product
Revision
PS Series firmware Version 10.0.3 or later
VMware ESXi Versions 6.0, 6.5, 6.7
vSphere Client vSphere 6.0, vSphere 6.5, vSphere 6.7
vSphere vMA or CLI vSphere 6.0, vSphere 6.5, vSphere 6.7
NOTE: VMware Management Assistant (vMA) is no longer supported beginning with vSphere version 6.7.
NOTE: For vSphere CLI version 6.5 or 6.7, you also need to install Strawberry Perl 5.24 or higher separately. Refer to the
Dell
EqualLogic Multipathing Extension Module Installation and User's Guide
for more information.
NOTE: The capability to import EqualLogic storage to a PowerStore array requires VMware ESXi version 6.5 U2.
Document Number: 110-6315
Rev. R1
April 2020
Dell EqualLogic Multipathing Extension Module Version 1.7 Release Notes 1

Summary of content (5 pages)