Manualshelf

Administrator Guide

ManualsBrandsDell ManualsCompellent (SCEqualLogic PS6210E
401402403404405406407408409410
Table Of Contents
Table 143. General Settings
Field Description Shortcut
General properties
Name Unique name, up to 63 characters (including periods, hyphens, and colons), that
identies the member.
Alt+A
Description (Optional) Description of the member, up to 127 characters. Fewer characters are
accepted for this eld if you enter the value as a Unicode character string, which
takes up a variable number of bytes, depending on the specic character.
Alt+D
Storage pool assignment
Storage pool assignment If multiple pools are available, you can choose which pool the member will belong to.
Alternatively, click Create new pool to create a new storage pool using this member.
None
Table 144. RAID
Field Description Shortcut
RAID policy Select the RAID level that you want the member to use.
NOTE: You cannot select RAID 50 for PS6610 arrays from the GUI. Instead,
you must use the CLI command member select raid-policy. See the
Dell
EqualLogic Group Manager CLI Reference Guide
for more information.
RAID 6: Alt+6
RAID 10: Alt+1
RAID 50: Alt+0
Initial RAID capacity Specify whether the member’s space will be available immediately or available after
the RAID conguration completes.
Immediate: Alt+I
Wait: Alt+W
Table 145. Encryption Key Backup (SED) (seen only on members with SED)
Field Description Shortcut
Key share 1, 2, and 3 Displays and allows you to copy each individual key share None
Copy all Copies all three key shares to the clipboard Alt+C
Save all... Saves all key shares to a selected destination on the user's computer Alt+S
Table 146. Management Interface Conguration (MWKA) (seen only on groups with a dedicated management network set up)
Field Description
IP address IP address of the interface. At least one network interface on a member must be on the
same subnet as the group IP address.
Subnet mask Netmask for the interface
Default gateway Uses the default gateway for all the member's network interfaces to enable communication
outside the local network
Enable this interface Makes a network interface operational if you congure it properly. Disabling a network
interface makes it unable to service network I/O requests, but does not uncongure the
interface.
Restrict to management access Displayed only for the highest-numbered interface on a control module, or the one that is
labeled Management on the physical control module.
Select this checkbox to use the interface exclusively for group management trac, as part
of conguring a group management network.
402
Reference: GUI Panels, Wizards, and Dialog Boxes