Users Guide

The following table describes the verification settings.
Table 12. Verification Settings
Option Description
Exchange Global Verification Window End time must be at least three hours later than the start time.
Dell recommends that you specify a range of time that corresponds with a period of
low computer usage (off-peak times) to make the best use of computer resources.
Verify newest Smart Copies first Verifies the Smart Copies beginning with the chronologically most recent and ending
with the oldest
Send email when verification time
exceeds creation interval
Causes a notification email to be sent to the default email account if the time required
to complete an operation exceeds the schedule’s frequency of Smart Copy creation
Combine creation and verification
emails when possible.
Enables you to concatenate emails to reduce the volume of mail
Configure Verification Settings
1. In the navigation area, click Settings, then Verification Settings.
2. In the Global Verification Window area, select the start and end times to perform verification.
3. (Optional) In the Verification Processing Order area, select the option to verify the newest Smart Copies first, before
verifying others.
4. (Optional) In the Email Options area, select the option to send email when the verification takes longer than the interval
you specified in step 2 to perform verifications, and (also optionally) select the option to combine emails into as few
messages as possible.
5. Click Save.
● If you manage multiple hosts, to make changes to multiple hosts, multiselect the hosts in the middle panel. The changes
affect all selected hosts.
● To restore settings to their current saved state, click Discard.
About PS Group Access Settings
You must configure access to one or more PS Series groups for ASM/ME to connect to for creating Smart Copies and other
functions.
If you used the Remote Setup Wizard to create a group, that group displays in the PS Group Access window. You can add
more groups or delete groups as needed.
Group access settings can be specified for the following purposes:
● Allow ASM/ME access to one or more PS Series groups for creating and managing Smart Copies, among other functions
● VDS and VSS CHAP settings enable these services to access a PS Series group
● Smart Copy access can enable the local computer to access Smart Copies created on other computers
● PowerShell/SMP access can authenticate PowerShell and SMP access to the group. SMP access replaces VDS access for
the Windows Server 2012 R2 and later operating systems
● (Optional) Enable single sign-on (SSO) to the group
Before setting these properties, CHAP must be configured on the PS Series group, either locally or on an external RADIUS
authentication server. For information about configuring CHAP on the PS Series group, see the Dell EqualLogic Group Manager
Administrator’s Guide.
PS Group Access Settings
The PS Group Access panel enables you to configure settings for the PS Series groups that store the volumes and Smart Copies
used by your applications.
The following table describes the settings on the Group Access Panel.
Configure ASM/ME
25