Users Guide
Table Of Contents
- About This Guide
- Dell EqualLogic Auto-Snapshot Manager/Microsoft Edition Version 5.4 User's Guide
- Introduction to ASM/ME
- Functions Provided By ASM/ME
- Supported Applications
- HIT Groups and Multiple Machine Management
- ASM/ME Smart Copies
- Smart Copy Types
- Smart Copy Operations for Template and Thin Clone Volumes
- Robust Data Recovery
- Thin-Provisioning a Volume
- SAN Data Copy Offload
- Scripts and Command Generation
- Alerts and Event Notification
- Remote Installations
- Failover Cluster Support
- ASM/ME and the Virtual Snapshot Service
- Functions Provided By ASM/ME
- Configure ASM/ME
- PS Series Group Requirements
- Windows Computer Requirements
- Required Access Controls
- VSS/VDS Service Access to the Group
- Access to Volumes and Snapshots
- iSCSI Target Connections
- Volume Mount Point and Drive Letter Assignments
- Mount Point Constraints in Cluster Environments
- ASM/ME Settings
- ASM/ME Graphical User Interface
- Start the ASM/ME GUI
- Tree Panel
- Tree Panel Behavior in Failover Cluster Environments
- Tree Panel Nodes
- Tree Panel Icons
- Group SharePoint Farm Nodes, Clusters, or Host Nodes
- About Aliases
- Customize Color Themes
- HIT Groups
- General ASM/ME Operations
- About Volumes
- Operations on Failover Clusters
- About Collections
- About Schedules
- About Smart Copies
- Restoring Data
- View Multipath Information
- View I/O Details
- Using ASM/ME with Exchange
- View Exchange Applications in ASM/ME
- Exchange Operations
- Overview of Exchange Smart Copies
- Exchange eseutil.exe Utility
- Recovery Considerations for Exchange
- Checksum Verification and Soft Recovery
- Run Checksum Verification and Soft Recovery Immediately
- Run Checksum Verification and Soft Recovery After Smart Copy Creation
- Schedule a Global Verification Task for Checksum Verification and Soft Recovery
- Run Checksum Verification and Soft Recovery on a Remote Host
- View Checksum Verification and Soft Recovery Status
- Checksum Verification and Soft Recovery Logging and Notification
- Create Exchange Smart Copies
- Schedule Smart Copies for Exchange Components
- Recover Exchange Data
- Using ASM/ME with SQL Server
- Using ASM/ME with Hyper-V
- Using ASM/ME with SharePoint
- SharePoint Installation Considerations
- Plan to Install on a SharePoint Farm
- Example of ASM/ME Installed on a SharePoint Farm
- Example of a SharePoint Farm with a SQL Cluster
- Install ASM/ME on a SharePoint Farm
- About Changes to an Existing SharePoint Farm
- Remove a HIT Group Host From a SharePoint Farm
- Add a Writer Host to a SharePoint Farm
- Change a Writer Host in a SharePoint Farm
- Change the Writer Host and Disable the VSS Writer in a SharePoint Farm
- Respond to Changes in a SharePoint Farm
- View SharePoint Farm Components in ASM/ME
- SharePoint Smart Copies
- Restore Options for SharePoint Smart Copies
- Availability of SharePoint Data Restoration Operations
- Mount a SharePoint Smart Copy
- Restore Selected Databases from a SharePoint Smart Copy
- Restore a Database In-Place From a SharePoint Smart Copy
- Restore a Database From a SharePoint Smart Copy as a New Database
- Restore an SSA From a SharePoint Smart Copy
- Using the Command Line Interface
- Introduction to ASMCLI
- How to Use ASMCLI Commands
- General Command Syntax
- ASMCLI Command Summary
- Command Parameters
- ASMCLI Commands and Their Syntax
- ASMCLI -alert
- ASMCLI -breaksmartcopy
- ASMCLI -cloneReplica
- ASMCLI -configureASM
- ASMCLI -configureCHAP
- ASMCLI -createCollection
- ASMCLI -delete
- ASMCLI -deleteCollection
- ASMCLI -enumerateiSCSIPortals
- ASMCLI -enumerateSmartCopies
- ASMCLI -help
- ASMCLI -list
- ASMCLI -modifyCollection
- ASMCLI -mount
- ASMCLI -Properties
- ASMCLI -restore
- ASMCLI -selectiveRestore
- ASMCLI -shutdownsystray
- ASMCLI -shutdownverifier
- ASMCLI -smart
- ASMCLI -unmount
- ASMCLI -verify
- ASMCLI -version
- Use a Script to Create Smart Copies
- Recover a Clustered Volume From a Clone
- Index
● Restore the original object in a new location—Applies to Smart Copies that contain database snapshots and database clones.
● Clone and restore the original object in a new location—Applies to Smart Copies that contain database replicas.
If you make changes to a volume layout, and you have a Smart Copy that predates the layout changes, you cannot use that
Smart Copy to recover data. Attempting to recover the data might cause data loss on the production volume.
You can mount or restore data from a Smart Copy of a volume that contained mount points at the time that you created the
Smart Copy. However, the restored mount points always references the same volumes that they referenced at the point in time
when you created the Smart Copy. You must manually change the restored mount points if you want them to reference
different volumes, such as another mounted Smart Copy.
Mount Smart Copies
Mounting a Smart Copy makes its contents accessible to the computer. If you are restoring certain files or a subset of files
contained within a Smart Copy, you need to mount it first.
After a Smart Copy is mounted, you can use it to access the data you want to restore. The Mount option supports both
Windows drive letters and mount points.
● A mount point is an empty folder on an existing NTFS or ReFS file system that serves as an access point for a new mounted
file system. Use the Mount option to access the data in a snapshot or clone Smart Copy created from volumes or
application components.
● When you mount a Smart Copy, ASM/ME opens the Select Volume Label dialog box for every object in the Smart Copy.
This dialog allows you to specify either a drive letter or a mount point on which to mount the snapshot or clone.
● If you take a Smart Copy of a collection that contains three volumes and then decide to mount the Smart Copy, the Select
Volume Label dialog box opens three times so that you can specify a mount point or drive letter for each of the volumes.
● You can choose not to mount a certain volume, but you must mount at least one volume in the Smart Copy.
● After a snapshot or clone volume has been mounted, you can copy data from it. The mounted volume appears under the
Volumes node in the tree panel, as a disk with an assigned drive letter or mount point next to it.
● As part of the mount operation, ASM/ME automatically sets the Smart Copy online on the PS Series group.
Prerequisites for Mounting Smart Copies
Before performing the procedure for mounting a Smart Copy, you must meet the following prerequisites:
● Ensure that the computer has the security credentials to access the Smart Copies in the set. If CHAP is used to restrict
computer access to Smart Copies in the group, but the credentials are not stored on the computer, a dialog box opens,
prompting you for the user name and password. See Smart Copy Access for more information about automatically supplying
the CHAP credentials.
● Identify the snapshot or Smart Copy to mount.
● Choose the drive letters or mount points to use.
If you intend to use a mount point, you can create an empty NTFS folder, ReFS folder, or you can use the Browse button to
navigate to a location where you can create a new folder before performing these steps.
Mount a Snapshot or Clone Smart Copy
1. Right-click a Smart Copy in the tree panel and select Mount, then click Next.
The Mount Smart Copy wizard starts. In the Mount folder root field, the default mount location is displayed.
2. To change the default mount location, click Browse, and navigate to the location where you want to mount the Smart Copy.
The panel displays the original volume from which the Smart Copy was created, the original host, and the checkboxes for
selecting whether to mount the Smart Copy (checked by default) or whether to mount it as read-only (also checked by
default, and a drop-down list enabling you to select a drive letter on which to mount the Smart Copy.
3. Provide a specific mount point with either a relative path, which is combined with the value in the mount root field, or a full
path, which is used exactly as specified.
The mount point is validated as you specify the data. Invalid mount points are shown in red text, and a tooltip in the volume
row displays the problem with the specified mount point.
General ASM/ME Operations
59