Users Guide
Table Of Contents
- Dell EqualLogic Host Integration Tools for Microsoft Edition Version 5.4 Installation and User's Guide
- About This Guide
- Introduction to Host Integration Tools
- Installation
- Obtain the Installation Kit
- Installation Considerations
- Install Host Integration Tools for Microsoft
- Install HIT/Microsoft on a Windows Server Core Machine
- Install HIT on a Windows Server Core Cluster
- About Remote Host Installations
- Install HIT on a Failover Cluster
- About Silent Installations
- Using HIT With a SharePoint Farm
- Remote Setup Wizard
- Remote Setup Command Line Utility
- Using the Multipath I/O Component
- Use the VDS Provider
- Use SCVMM With the Dell EqualLogic SMP
- Install the Dell EqualLogic Storage Management Provider
- Configure the Dell EqualLogic Storage Management Provider
- Create a Classification for Dell EqualLogic Storage Resources
- Import the SMP Through the SCVMM GUI
- Configure PS Series Groups
- Configure Group Access on Managed Hosts and Clusters
- Configure Storage for VM Rapid Provisioning
- Create a VM Template From a VHD
- Migrate the Rapid-Provisioned VMs
- Migrate Storage of a Deployed VM to Another Location
- Troubleshoot SCVMM Issues
- Supported SMP PowerShell Cmdlets
- Use the HPC iSCSI Provider
- Tools and Utilities
- Index
Table 15. HPC iSCSI Provider Settings (continued)
Setting Default Value Description
storage reaches the warning level, the PS Series group will
issue an alert. When the assigned storage reaches the
maximum value, no further storage can be assigned to the
volume. For base volumes, the minimum volume reserve
cannot be less than 10 percent.
Difference Volume Provisioning 0%, 80%, 100% These parameters have the same effect as the base volume
provisioning parameters, but apply to differencing volumes.
Create new volumes with open ACLs no Normally the HPC server maps a volume to a given node,
which causes an ACL to be set on the volume. In some cases
this might cause problems, particularly if the HBA is not using
the IQN string the HPC Server has assigned to it during boot.
Selecting this option will cause all volumes created by the
iSCSI Provider to be assigned an unrestricted ACL, meaning
that any initiator will be able to connect. You should only
enable this option if you are experiencing authorization failures
when nodes attempt to log in to their assigned volumes.
Use the HPC iSCSI Provider 63