PS6210 硬件用户手册 4 维护电源设备和散热模块
图 32: 插入 700W 电源设备和散热模块
图 33: 插入 1080W 电源设备和散热模块
3. 确保电源开关处于 OFF( 关闭) 位置。
4. 将电源电缆连接至电源设备和散热模块,并将电缆插入电源插座。
注 : 连 接 电 源 电 缆 后 ,交流 LED 指 示 灯 亮 起 ,即 使 此 时 电 源 开 关 处 于 关 闭 位
置 也 是 如 此 。
5. 使用用于交流电源电缆的搭扣带,如图 34 和图 35 中所示。
6. 打开电源设备和散热模块的开关。
37