Owners Manual

PS6210 Hardware Owner's Manual 3 Maintaining Control Modules
Figure 17: Control Module LEDs
Table 6: Ethernet and Management Port LED Descriptions
Ethernet LED
Location
State Description
Top (Link)
Off
No power or not connected to network.
On (green)
Connected to network.
Bottom (Act)
Off
No power, not transmitting, or not receiving.
On (amber)
Transmitting or receiving.
10GBASE-T
Ethernet
LED Location
State
Description
Left (Link)
Off
No power, not connected to network, or passive.
On (green)
Connected to network.
Right (Act)
Off
No power, not transmitting, or not receiving.
On (amber)
Transmitting or receiving.
SPF+ Ethernet
LED Location
State Description
Top (Link)
Off
No power, not connected to network, or passive.
On (green)
Connected to network.
Bottom (Act)
Off
No power, not transmitting, or not receiving.
On (amber)
Transmitting or receiving.
Management
LED Location
State Description
Left (Link)
Off
No power or not connected to network.
On (green)
Connected to network (100mbit).
On (amber)
Connected to network (10mbit).
Right (Act)
Off
No power, not transmitting, or not receiving.
On (blinking green)
Transmitting or receiving.
Table 7: Control Module Status LED Descriptions
LED Name State Description
PWR
Off No power.
On (steady
green)
Power/OK.
ERR
Off Normal operation or no power.
Steady red
Array is starting up, in error condition, in Standby mode, or returning from
Standby mode.
Blinking red
Array is entering power standby mode because the Standby On/Off button
was pressed.
17