Users Guide
Table Of Contents
- Dell EqualLogic Host Integration Tools for Microsoft Edition Version 5.3 Installation and User's Guide
- About This Guide
- Introduction to Host Integration Tools
- Installation
- Obtain the Installation Kit
- Installation Considerations
- Install Host Integration Tools for Microsoft
- Install HIT/Microsoft on a Windows Server 2012 R2 Core Machine
- Install HIT on a Windows Server 2012 R2 Core Cluster
- About Remote Host Installations
- Install HIT on a Failover Cluster
- About Silent Installations
- Using HIT With a SharePoint Farm
- Remote Setup Wizard
- Remote Setup Command Line Utility
- Using the Multipath I/O Component
- Use the VDS Provider
- Use SCVMM With the Dell EqualLogic SMP
- Install the Dell EqualLogic Storage Management Provider
- Configure the Dell EqualLogic Storage Management Provider
- Create a Classification for Dell EqualLogic Storage Resources
- Import the SMP Through the SCVMM GUI
- Configure PS Series Groups
- Configure Group Access on Managed Hosts and Clusters
- Configure Storage for VM Rapid Provisioning
- Create a VM Template From a VHD
- Migrate the Rapid-Provisioned VMs
- Migrate Storage of a Deployed VM to Another Location
- Troubleshoot SCVMM Issues
- Supported SMP PowerShell Cmdlets
- Use the HPC iSCSI Provider
- Tools and Utilities
- Index
Setting Default Value Description
the volume. For base volumes, the minimum volume reserve cannot
be less than 10 percent.
Difference Volume Provisioning 0%, 80%, 100% These parameters have the same effect as the base volume
provisioning parameters, but apply to differencing volumes.
Create new volumes with open ACLs no Normally the HPC server maps a volume to a given node, which
causes an ACL to be set on the volume. In some cases this might
cause problems, particularly if the HBA is not using the IQN string
the HPC Server has assigned to it during boot. Selecting this option
will cause all volumes created by the iSCSI Provider to be assigned
an unrestricted ACL, meaning that any initiator will be able to
connect. You should only enable this option if you are experiencing
authorization failures when nodes attempt to log in to their
assigned volumes.
60 Use the HPC iSCSI Provider