Install Guide
PS6610 설 치 및 설 정 안 내 서
6 저장 소 할 당
access_control 매개 변수 는 다 음 옵 션 중 하나 이상이 될 수 있습 니다 .
• apply-to type (여기서 type은 volume, snapshot 또는 both)
• initiator initiator_name
• ipaddress address
• username chap_name
볼륨 에 대 해 최 대 16개의 액세스 제어 기록을 생성할 수 있습 니다 .
다음 보기에서는 50GB 볼 륨 1개와 액세 스 제 어 기 록 1개를 생성합니다. 초기 자 이 름이 지정된 컴
퓨터 만 볼 륨을 액세스할 수 있습니다.
group1> volume create staff1 50GB
group1> volume select staff1 access create initiator iqn.1991-
05.com.microsoft:WIN2008Server.company.com
GUI를 사 용 하 여 볼 륨 생 성
최종 사용자에게 스토리지 공간 을 제 공하 기 위 해 사 용자 가 호 스트 컴퓨터에서 액세 스할 수 있는
표준 볼륨을 생성합니다.
표준 볼륨을 생성하기 전에 다음 사항을 이해 해야 합니다.
• 볼륨 특성 및 그룹의 그룹 전체 기본 설정이 볼륨 에 적 용됩 니다 .
• 볼륨 보안 및 액세스 제어 특히 참조할 부분 :
– 컴퓨 터가 볼륨 및 볼륨의 스냅샷에 연결하기 위해 충족해야 하는 조건 CHAP 사용 자 이 름,
IP 주소 또는 iSCSI 초기 자 이 름을 지정합니다. 이 정 보는 볼륨 및 볼륨 의 스 냅샷 에 적 용되
는 액 세스 제어 레코드를 생성합니다.
– 볼륨 에 대 한 권 한(읽기-쓰기(기본 값) 또 는 읽 기 전 용).
– 다른 iSCSI 정 규화 된 이 름(IQN)이 있는 초기자가 볼륨 및 볼륨의 스냅샷에 액세스하도록
허용 할지 또는 금지(기 본값 )할지 여부.
• 이 기 능을 볼륨에 적용하기 전에 씬 프로 비저 닝과 관련된 위험 및 이 점.
• 볼륨 을 생 성할 때 풀 용량을 초과 하면 사용 가능한 풀 공 간이 음수 값이 됩니다. 볼 륨 크 기를
줄입 니다 .
씬 프 로비 저닝 을 활 성화 하면 씬 프로비저닝된 볼륨 특성에 대한 기본 설정을 조정할 수 있습 니
다. 이러 한 설 정은 보고된 크기 의 비 율에 기반합니다.
표준 볼륨을 생성하려면 다음 섹션에 설명 되어 있는 볼륨 생성 마법사를 사용합니다.
볼 륨 생 성 마 법 사
볼륨 생성 마법사는 이름, 크 기, 풀 할 당, 섹터 크기, 스 냅샷 공간, iSCSI 옵션 및 액세스 제어 지점
을 비 롯한 다양한 옵션 설정 및 새 볼 륨 정 의 프 로세 스를 안내합니다.
1단 계 : 볼 륨 설 정
필 드 설 명 바 로 가 기 키
이름
(필 수 ) 볼 륨 을 고 유 하 게 식 별 하 는 이 름 입 니 다 . 최 대 길 이 는
63자 의 ASCII 문 자 (마침 표 , 하 이 픈 및 콜 론 포 함 )입 니 다 .
Alt+A
32