Owners Manual
PS6610 硬件用户手册 3 控制模块维护
• 如果仅仅是装回控制模块( 原因为
非
可疑电池故障) ,则取出电池并将其用于更换的控
制模块中。
运 输 要 求
在将以前安装的控制模块移动到另一个位置之前,您必须将电池放电至较低电量,称为
运输模式
。将电池置于运输模式会在控制模块储存或运输过程中,将电量损失降低到最
小。每当阵列关闭时,会自动将电池置于运输模式。
注 : 如果您必须将电池单元运回 Dell,则确保包装上标有“锂离子电池”。可以通过空运或
陆运方式运输电池。
开 始 之 前
1. 请确保您要更换其电池的控制模块处于次要模式。如果它处于活动状态,则对该控制
模块执行故障转移,从而使其成为次要模块。
要让控制模块成为次要模块,请执行以下操作:
a. 单击Group。
b. 展开Members并选择成员名称。
c. 单击Controllers选项卡以显示控制模块的状态。
d. 单击Maintenance选项卡,然后单击restart。
2. 如果适用,请为次要控制模块上的网络电缆贴上标签,以便稍后可以正确地安装它们。
卸 下 电 池
1. 从次要控制模块断开网络电缆。
2. 卸下次要控制模块,将其放置在静电安全工作区域,并让电池盖朝上。
3. 电池盖承载电池和相关电子器件,并通过单个螺丝固定。此螺丝可卸下。使用梅花槽
#2 螺丝刀(图 19)拧松螺丝,从孔中卸下螺丝并将螺丝放在一边,以防掉入控制模块。
图 19: 卸下电池盖上的螺丝
注 : 如果螺丝掉入控制模块,则可能必须将控制模块退还给 Dell 进行维修。
27