Owners Manual

PS6610 Hardware Owner's Manual 1 Basic Storage Array Information

Item Indicator Description

Fault drawer 1

7 Drawer 2

Fault

Amber when a drive, cable, or sideplane fault has occurred in

drawer 2

Note: The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be

replaced only by support personnel. During the array power-up sequence, these LEDs will cycle

through different states until the array is fully started and the active control module has been

determined.

Back-Panel Features and Indicators

The back of a PS6610 is shown in Figure 5.

Table 4 describes the main features of the back panel.

Figure 5: Back-Panel Features

Table 4: Description of Back-Panel Features

Item Feature Identifier Description

1 Control Module

CM0 (left)

CM1 (right)

The control module provides:

• Connection to a data path between the array and

the applications using the storage

• Array management functions for your array

2 Cooling Fan

Modules

Modules are labeled

0-4 from left to right

Cooling fan module for array (5 total)

3 Power Switches None Controls power supply output to the array. Each