Setup Guide
A
PS Series Array CLI Output Examples
The following sections provide examples of the output displayed when you update the PS Series rmware as described in Update
the PS Series Firmware Using the CLI.
Output Displayed When Firmware Is Copied to an Array Using FTP
The following example uses FTP to copy a rmware update kit named kit_12345678.tgz from a host to an array with the IP address
192.0.2.53.
NOTE: This output is displayed during step 1 of the procedure in Update the PS Series Firmware Using the GUI.
$ ftp
ftp> open 192.0.2.53
Connected to 192.0.2.53.
220 192.0.2.53 FTP server (NetBSD-ftpd 20100320) ready.
Name: (192.0.2.53:root): grpadmin
331 Password required for grpadmin.
Password: xxxxxxx
230 User grpadmin logged in.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>
binary
200 Type set to I
ftp>
put kit_v10.0.0-R420720_2965447215.tgz
local: kit_v10.0.0-R420720_2965447215.tgz remote: kit_v10.0.0-R420720_2965447215.tgz
200 PORT command successful.
150 Opening BINARY mode data connection for 'v10.0.0-R420720_2965447215.tgz'.
226 Transfer complete.
13508472 bytes sent in 02:42 (81.06 KB/s)
ftp>
close
221- Data traffic for this session was 13508472 bytes in 1 file.
Total traffic for this session was 13509009 bytes in 1 transfer.
221 Thank you for using the FTP service on 192.0.2.53.
ftp> bye
Output Displayed When Firmware Is Copied to an Array Using SCP
The following example uses the Linux scp command to copy a rmware update kit named kit_12345678.tgz from a host to an array
with the IP address 192.0.2.53.
NOTE: This output is displayed during step 2 of the procedure in Update the PS Series Firmware Using the CLI.
$ scp kit_12345678.tgz grpadmin@192.0.2.53:
The authenticity of host '192.0.2.53' can't be established.
DSA key fingerprint is 93:30:25:e1:7f:f8:ce:78:06:a6:97:67:94:70:aa:e6.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.0.2.53' (DSA) to the list of known hosts.
grpadmin@192.0.2.53's password: xxxxxxx
kit_12345678.tgz 100% 26MB 4.4MB/s 00:06
PS Series Array CLI Output Examples
25