Setup Guide
Table 2. Compatibility Matrix
PS Series array rmware v10.x v9.1.x v9.0.x v8.1.x v8.0.x v7.1.x v7.0.x
FS Series appliance
rmware
v4.0.230030 or later v3.0.940200 v3.0.x
1
1
FS Series rmware version 3.0.x, up to but not including v3.0.940200. PS Series rmware v7.1.x and v7.0.x are not compatible with
FS Series rmware v3.0.940200 or later.
About Dell Storage Update Manager
The Dell Storage Update Manager application is Dell's recommended method for performing rmware updates. This application helps
you analyze your current Dell EqualLogic storage congurations to determine which components, if any, can or need to be updated.
Using a multistep rmware update wizard, Dell Storage Update Manager guides you and simplies the update process. It provides an
outline of all components that require updating and the estimated time to complete.
Deployed as a standalone Java application, Dell Storage Update Manager runs independently of Group Manager and SAN
Headquarters, but oers a similar interface and help features.
Dell Storage Update Manager supports PS Series array rmware versions 6.0.x or later and FS Series appliance rmware versions
3.0.x or later.
NOTE: If you are running a rmware version that is earlier than those supported, you must use the CLI to perform the
update. Follow the procedures as described in the following sections:
• Update the PS Series Firmware Using the CLI
• FS Series Firmware Update Procedure for NAS Controllers
The Dell Storage Update Manager application updates the following components:
• PS Series array rmware
• FS Series appliance rmware
• PS Series disk drive rmware (excluding SED disk drives and FS Series disk drives)
Features and Benets
Dell Storage Update Manager oers the following features and benets:
• Runs on Windows, Linux, and Macintosh systems
• Updates one group at a time
• Updates multiple members of a group
• Multiple instances can be run to update multiple groups
• When analyzing groups, provides the latest rmware versions
• Provides log les for each group
• Launches the Group Event Log Viewer for troubleshooting
EqualLogic Host Software
NOTE: Dell recommends that you install the EqualLogic host software products, Host Integration Tools (HIT) and SAN
Headquarters (SAN HQ).
Host Integration Tools enable application and hypervisor-consistent data protection and integrated end-to-end management and
operation of the EqualLogic SAN through tight integration with Microsoft, VMware, and Linux operating platforms and applications.
HIT also enables host platforms to intelligently leverage EqualLogic SAN architecture, storage, and network usage, and implements
changes such as registry settings and conguration options on the hosts that follow Dell's recommended best practices. Additionally,
Overview
7