Users Guide
Table Of Contents
- Dell EqualLogic Host Integration Tools for Microsoft Edition Version 5.3 Installation and User's Guide
- About This Guide
- Introduction to Host Integration Tools
- Installation
- Obtain the Installation Kit
- Installation Considerations
- Install Host Integration Tools for Microsoft
- Install HIT/Microsoft on a Windows Server 2012 R2 Core Machine
- Install HIT on a Windows Server 2012 R2 Core Cluster
- About Remote Host Installations
- Install HIT on a Failover Cluster
- About Silent Installations
- Using HIT With a SharePoint Farm
- Remote Setup Wizard
- Remote Setup Command Line Utility
- Using the Multipath I/O Component
- Use the VDS Provider
- Use SCVMM With the Dell EqualLogic SMP
- Install the Dell EqualLogic Storage Management Provider
- Configure the Dell EqualLogic Storage Management Provider
- Create a Classification for Dell EqualLogic Storage Resources
- Import the SMP Through the SCVMM GUI
- Configure PS Series Groups
- Configure Group Access on Managed Hosts and Clusters
- Configure Storage for VM Rapid Provisioning
- Create a VM Template From a VHD
- Migrate the Rapid-Provisioned VMs
- Migrate Storage of a Deployed VM to Another Location
- Troubleshoot SCVMM Issues
- Supported SMP PowerShell Cmdlets
- Use the HPC iSCSI Provider
- Tools and Utilities
- Index
separate Run As account to manage SMP. Refer to the Microsoft SCVMM documentation regarding correct setup of
the service login account.
2. In the SCVMM server GUI, configure PowerShell/SMP access (PS Authentication).
3. Use the SCVMM Command Shell (SCVMM PowerShell environment) and run the Import-SCStorageProvider command.
Alternatively, import SMP using the SCVMM Console GUI. See Import the SMP through the SCVMM GUI.
Create a Classification for Dell EqualLogic Storage
Resources
1. In the SCVMM Console GUI, click Storage → Classification and Pools, then right-click and select Create Classification.
2. Specify a unique classification name (for example, EqualLogic) and optionally provide a description. Click Add.
3. Confirm that the new classification is displayed in the Classification view.
4. Continue with Configure PS Series Groups.
Import the SMP Through the SCVMM GUI
1. Open the VMM Console GUI and switch to the Fabric workspace view in the bottom-left workspace selection pane.
2. Select Providers under the Storage subtree. Right-click to select Add Storage Devices.
3. On the Select Provider Type screen, select Add a storage device that is managed by an SMP provider, then click Next.
4. On the Specify Discovery Scope screen (see the following figure), select Dell EqualLogic Storage Management Provider from the
Provider drop-down list, click Import, then click Next.
Figure 6. Specify Discovery Scope Screen
5. Verify that the configured PS Series groups (in this example, WinDev74Grp) are discovered, then click Next. (See the following
figure.)
Use SCVMM With the Dell EqualLogic SMP
47