Release Notes

Time-to-Live
This feature is applicable for SC to PS cross-platform replication only. Prior to this release, PS did not honor the Time-to-Live (TTL) field
and replica snapshots were never deleted from PS no matter what the TTL value was. TTL now deletes the replica snapshots on the PS
array based on the TTL value sent by the Storage Center during the creation of a replica snapshot. Only the expired snapshots are
deleted.
NOTE:
• Modifying the TTL value on the Storage Center is supported with Dell Storage Manager 2018 R1 or later.
• The latest replica snapshot for a volume is never deleted even when it has expired.
grpparams test-email-home CLI Command
A new command, grpparams test-email-home was created to test whether EmailHome is enabled. For command usage and
output information, see the Group Manager CLI Reference Guide.
Active Directory Search Path Optimization
PS Series v10.0 provides the option to disconnect the Base DN from search paths and adds two search paths, group-search-dn and
user-search-dn. These two options enable Active Directory to perform recursive object search within a specified path. If you do not
specify either of these two new options, the behavior of the ldap server-list create command will be the same as earlier
releases.
System Limits and Compatibility
This section includes information about supported control modules, configuration limits, replication partnerships, and Manual Transfer
Utility versions.
Control Module Support
The following table describes the supported control modules and the array models that use them:
Table 2. Control Module Support
Control Module Description Drive Type and Maximum
Quantity
Array
Models
1
Type 19—Two 10Gb dual-media Ethernet Interfaces (two 10GBASE-T, two SFP+),
labeled Ethernet 0 and Ethernet 1. Individually selectable as 10GBASE-T or SFP+. One
additional port labeled MANAGEMENT, restricted to management network use.
Model 70–0485 (Red Label)
12 x 3.5" or 24 x 2.5"
Type: SAS, Nearline SAS, or
SSD
PS4210
Type 18—Two 10Gb dual-media Ethernet Interfaces (two 10GBASE-T, two SFP+),
labeled Ethernet 0 and Ethernet 1. Individually selectable as 10GBASE-T or SFP+. One
additional port labeled MANAGEMENT, restricted to management network use.
Model 70-0480 (Turquoise Label)
84 x 3.5" or 84 x 2.5"
Type: SAS, Nearline SAS, or
SSD
PS6610
Type 17—Two 10Gb Ethernet ports (one copper, one SFP+), both labeled Ethernet 0.
One port can be active at a time. One additional port labeled MANAGEMENT, restricted
to management network use.
Model 70–0478 (Yellow/Gold Label)
12 x 3.5" or 24 x 2.5"
Type: SAS, Nearline SAS, or
SSD
PS4110
Type 15—Two 10Gb dual-media Ethernet Interfaces (two 10GBASE-T, two SFP+),
labeled Ethernet 0 and Ethernet 1. Individually selectable as 10GBASE-T or SFP+, One
additional port labeled MANAGEMENT, restricted to management network use.
Model 70-0425 (Gray Label)
24 x 3.5" or 24 x 2.5"
Type: SAS, Nearline SAS, or
SSD
PS6210
Type 14—Two 10Gb Ethernet ports (one copper, one SFP+), both labeled Ethernet 0.
One port can be active at a time. One additional port labeled MANAGEMENT, restricted
to management network use.
Model 70–0477 (Orange Label)
24 x 2.5" or 24 x 3.5"
Type: SAS, Nearline SAS, or
SSD
PS6110
Dell EqualLogic PS Series Storage Arrays Firmware Version 10.0.3 Release Notes 5