Administrator Guide

Create an Access Policy Group
Access policy groups combine individual access policies together so that they can be managed as a single entity.
1. Click Group → Group Conguration.
2. Click the Access Policies tab.
3. In the Access Policies panel, locate the Access Policy Groups section and click New to open the New Access Policy Group
dialog box.
4. Specify a policy name for the new group and (optionally) a description.
5. In the Access Policies section, click Add. The Add Access Policy dialog box opens and displays a list of all the access policies
that have been previously dened.
6. Select the checkbox next to the name of each access policy that you want to include in the group. Up to 64 policies can be
selected.
NOTE: You have the option to create additional access policies from this dialog box, as well as modify or remove any
of the existing access policies.
• To create a new access policy, click New.
• To edit an existing access policy, select the checkbox next to that policy name and click Modify.
• To delete an existing access policy from the group, select the checkbox next to that policy name and click Delete.
7. Click OK. The Create Access Policy Group dialog box now shows the names of the access policies that you selected to be part
of the new policy group.
NOTE: You can modify or remove these access policies.
8. Click OK to nish and create the new access policy group.
Associate an Access Policy Group to a Volume
Associating access policy groups to volumes can be achieved in two ways, depending on how many access policy groups you want
to assign to how many volumes. You can either select a single access policy group and choose which volumes you want to associate
it with, or you can select a single volume and choose which policy groups you want to associate it with. If you need to associate only
one access policy group to one volume, either method works.
Manage Access Controls for VDS/VSS Access
To allow VDS and VSS access to the group, you must create at least one VDS/VSS access control policy that matches the access
control credentials you congure on the computer by using Remote Setup Wizard or Auto-Snapshot Manager/Microsoft Edition.
The same access control constructs (access policies, access policy groups, and basic access points) are available for dening
VDS/VSS access.
1. Click Group → Group Conguration.
2. Click the VDS/VSS tab.
3. Take the appropriate action in the VDS/VSS Access Control List panel to either add, modify, or remove access.
Add, Modify, or Remove an Access Policy Group:
• To add an access policy group for VDS/VSS access, click Add. Select the checkbox next to the additional policy groups
that you want to assign and click OK.
• To make changes to the access policies within an access policy group, select a group policy and click Modify to open the
Edit Access Policy Group dialog box. You can add, modify, or remove the access policies within this group.
• To remove an entire policy group from VDS/VSS access, select that policy group name and click Delete. When prompted to
conrm the decision, click Yes.
Add, Modify, or Remove an Access Policy:
• To add an additional access policy for VDS/VSS access, click Add. Select the checkbox next to the additional access
policies that you want to assign and click OK.
116
About Volume-Level Security