Manualshelf

Administrator Guide

ManualsBrandsDell ManualsCompellent (SCEqualLogic PS6610X
221222223224225226227228229230
Table Of Contents
4. Choose the appropriate option.
5. Press the Escape key at any time during a test to stop the test.
Generating PS Series and NAS Cluster Diagnostics Reports
NOTE: To generate diagnostics reports, you must have group administrator (grpadmin) privileges.
To generate a diagnostics report:
1. Log in to Group Manager by using your administrator login ID and password.
2. In the navigation pane, click Tools.
3. Click Diagnostics reports.
4. In the Generate and email diagnostics wizard, type or select the necessary data in the pages.
Adding SMTP Servers
1. Log in to Group Manager by using your administrator login ID and password.
2. In the navigation pane, click the Tools tab.
3. Click Diagnostics reports.
4. In the Generate and email diagnostics wizard, type or select the necessary data in the pages.
5. In the PS Series Diagnostics–Report Destination wizard, click Congure SMTP.
6. In the Congure Email dialog box, click Add.
7. In the Add SMTP server dialog box, type the IP address of the SMTP server.
8. For Port, type the port number at which the network connection must be started.
To use the default port, click use default port.
9. Click OK.
The SMTP server is added and listed in SMTP servers.
Modifying SMTP Server Properties
1. Log in to Group Manager by using your administrator login ID and password.
2. In the navigation pane, click Tools.
3. Click Diagnostics reports.
4. In the Generate and email diagnostics wizard, type or select the necessary data in the pages.
5. In the PS Series Diagnostics–Report Destination wizard, click Congure SMTP.
6. In the Congure Email dialog box, under the SMTP servers list, select the SMTP server and then click Modify.
7. In the Modify SMTP server dialog box, edit the IP address of the SMTP server.
8. In Port, edit the port number to which the connected must be started.
9. Click OK.
The SMTP server properties are updated and listed in SMTP servers.
Deleting SMTP Servers
1. Log in to Group Manager by using your administrator login ID and password.
2. In the navigation pane, click Tools.
3. Click Diagnostics reports.
4. In the Generate and email diagnostics wizard, type or select the necessary data in the pages.
5. In the PS Series Diagnostics–Report Destination wizard, click Congure SMTP.
6. In the Congure Email dialog box, select the SMTP server and then click Delete.
230
Diagnose and Resolve NAS Cluster and PS Series Issues