Administrator Guide

NOTE: The “Go to” icons work only when monitoring is paused.
Table 53. Performance Monitor Operation Iconss
Icon Operation
Start polling the data.
Stop polling the data.
Go to the start (rst item).
Go to the previous item.
Go to the next item.
Go to the end (last item).
Add, Change, or Remove Statistics
You can display up to four sets of statistics in the Performance Monitor window.
To add more statistics:
1. Click Add statistics to open the Select Statistics dialog box.
2. Expand Members.
3. Expand a specic member.
4. Expand a component or statistics category.
5. Select a statistic to display.
6. Click OK.
7. To add more sets of statistics (up to four), repeat steps 1 through 6.
In the top-right corner of each statistics panel, use the two icons to either:
• Select a dierent set of statistics to display in that panel
• Close (remove) that panel
When a panel is removed, all other panels remain open in the Performance Monitor window and are resized to ll the window.
You can open a new panel in the window (up to four total).
Using Performance Monitor Counter Sets
Counter sets in the Performance Monitor display detailed usage statistics about SAN components. You can create custom counter
sets or use precongured sets that the system provides. You can also modify and delete custom counter sets.
NOTE: You cannot modify or delete precongured counter sets.
To create (add) or modify counter sets:
1. In the Performance Monitor window, click Add statistics.
2. In the Select Statistics dialog box, click Counter sets.
3. In the Counter Set Management dialog box, select the type of statistics that you want to include in the counter set.
4. Click the appropriate link to open the Counter Set Modication dialog box.
5. Type a name and description, and then select the statistics that you want to include in the counter set.
6. Click OK in the Counter Set Modication dialog box.
7. Click Close in the Counter Set Management dialog box.
About Monitoring
329