Administrator Guide

Field Description Shortcut
• error – Client cannot nd the le specied by the user, either because the le
has not been created yet (the copy is not complete) or the correct le or
location was not provided.
• running – Data transfer is currently in progress.
• need more les – When manually replicating a volume, if you need to break it
into segments (usually due to space limits) this message is displayed when MTU
is done copying that segment.
For example, if you are copying a 15TB volume and the device can only hold
3TB, set the segment size to 3TB and copy only one segment at a time. When it
reaches the 3TB capacity, MTU stops and displays the need more files
message. Either load the next segment or get another device, and continue the
copy operation.
• interrupted – The transfer operation was stopped. To continue creating or
loading les, click Resume.
If you interrupt and then resume a copy operation, MTU creates the next le in
the sequence. The interrupted transfer le might be smaller than the other les,
but is still valid. All the transfer les are used during the load operation on the
receiving group.
If you interrupt and then resume a load operation, the operation continues
loading data from the same transfer le that was in progress.
Phase Phase of the operation:
• Copy – Copying the data to be transferred
• Verify – Checks for errors in the data that was written in the transfer le
• Load – Loads the copied data to the intended computer
Progress Percentage progress bar of the manual transfer operation
Actions Provides links that enable you to:
• View details about a transfer
The details are displayed in the Copy data from volume to le pop-up window.
• Delete a transfer
– Before you can delete a task, the task must be in a stopped state. You
cannot delete a running task. If a task that you intend to delete is still
running, stop it rst.
– Choose options in the Delete task conrmation dialog box to continue.
• Stop a transfer
– When you stop a running task, you can subsequently restart or delete the
stopped task by using the Group Manager icons that are displayed after the
task is stopped.
– Click Yes or No in the Stop data transfer conrmation dialog box to
continue.
• Resume a stopped transfer
Use the Resume Data Transfer wizard to resume the transfer operation.
Reference: GUI Panels, Wizards, and Dialog Boxes
435