Administrator Guide

Load Data from Transfer File Wizard
The Manual Transfer Utility Load Data from Transfer File wizard copies the transfer le that you created on the primary group to the
secondary group. Using the wizard, you specify the location of the transfer le and the encryption password, if applicable.
The wizard includes the following steps:
• Step 1: Source – Transfer File
• Step 2: Destination – Replication Snapshot
• Step 3: Summary
Step 1 allows you to specify the location of the transfer le and type and encryption password if applicable.
Table 303. Step 1: Source – Transfer File
Field Description Shortcut
Location of transfer le Browse to the location of the transfer le on your system. Alt+L
Encrypted with
password
If the le requires a password to access, select this eld and type the password. Alt+E
Step 2 displays the status of your iSCSI access to a replication snapshot and also describes the SNMP community strings that are
created during the process.
Table 304. Step 2: Destination – Replication Snapshot
Field Description
Access to replication snapshot Displays the access status of the operation.
• If the access status is listed as unrestricted, you can proceed with copying the
snapshot data to the transfer le.
• If the status is listed as no access, you must rst establish iSCSI access to the
group before continuing with this operation.
SNMP community Describes the SNMP community strings that are temporarily added to your system’s MIB
to facilitate copying the data transfer le. These community strings are deleted when the
transfer is completed.
Step 3 summarizes the settings that MTU will use to complete the operation if you click Finish.
Table 305. Step 3: Summary
Field Description
Source - Transfer Files Indicates the location of the transfer les and whether or not data encryption is enabled
Destination - Replication Snapshot Indicates the timestamp that will appear on the transfer le, as well as the iSCSI target
that MTU will use to gain access to the replication snapshot
Local CHAP Accounts Panel
Table 306. Local CHAP Accounts Panel
Field Description
Local CHAP user Name of the account
Status Indicates whether the account is enabled or disabled
Reference: GUI Panels, Wizards, and Dialog Boxes
471