Manualshelf

Administrator Guide

ManualsBrandsDell ManualsCompellent (SCEqualLogic PS6610X
481482483484485486487488489490
Table Of Contents
Title Field Description Shortcut
NAS cluster
management IP address
IP address that allows access between the PS Series group and the
NAS cluster. The management IP address must be on the same subnet
as the group IP address.
Alt+M
Netmask (Read-only) Subnet to which the SAN IP address belongs
NOTE: After you perform a SAN network change with
replication congured, you will need to manually create a new
static route for the new SAN network.
Alt+E
NAS controller IP addresses for SAN network
Service tag NAS member service tag containing a unique identication number None
NAS controller Name of the NAS controller in the pair None
IP addresses 1–4 Address that allows access between the PS Series group and the NAS
controllers. The NAS controller IP addresses must be on the same
subnet as the group IP address. You can enter only the maximum
number of IP addresses allowed for your NAS appliance hardware.
None
Auto ll Populates the table with IP addresses based on the next available
addresses after the NAS cluster management IP address:
• All IP Addresses (Alt+A)
• Only IP Address 1 (Alt+O)—Use for testing purposes only. For
production, use the All IP Addresses option.
Alt+F
Clear Clears all the IP address elds Alt+R
Modify Schedule Dialog Box
The Modify Schedule dialog box displays slightly dierent options depending on whether the existing schedule is for a volume or a
NAS container, whether it is for snapshots or replicas, and the type of schedule (once, hourly, or daily). The following table contains
all the possible elds and options, and indicates to which situation they apply.
Table 346. Modify Schedule Dialog Box
Field Description Schedule Type and
Object
Shortcut
Schedule name Name of the data reduction schedule you are modifying All Alt+M
Enable schedule Enables the schedule to run All Alt+E
Start date Date for the schedule to start Hourly and daily Alt+S
End date Date for the schedule to end Hourly and daily Alt +D
Date Date for the schedule to run Once Alt +D
Time Time for the schedule to run Once Alt +T
Frequency How often in a given day the schedule will run Daily Alt +V
Start time Start time for the schedule. The times are specied in 12-
hour format.
Hourly and daily Alt+A
Repeat interval How often the schedule runs each day Hourly and daily Alt+R
488
Reference: GUI Panels, Wizards, and Dialog Boxes