Owners Manual

PS6610 硬件用户手册 1 基本存储阵列信息

2. 使用具有读写访问权限的帐户(例如 grpadmin 帐户)登录。

3. 输入 shutdown 命令：

Password:

Welcome to Group Manager

group1> shutdown

输入 shutdown 命令之后，系统将会显示类似于下列输出的信息：

Do you really want to shutdown the system?(yes/no)

Halt at Fri Dec 12 09:43:44 EST 2014 -- please wait...

6932:0:logevent:12-Dec-2014

09:43:44.400000:logevent.cc:238:WARNING::25.3.0: User has initiated a

clean halt restart.

Main power usage is 68.5702 watts

sbs_ship_mode: Ship Mode request sent to battery

PLEASE WAIT FOR SHIP MODE CONFIRMATION MESSAGE!!

Waiting for Ship Mode entry: 5 sec

Waiting for Ship Mode entry: 10 sec

Waiting for Ship Mode entry: 15 sec

Waiting for Ship Mode entry: 20 sec

Waiting for Ship Mode entry: 25 sec

Waiting for Ship Mode entry: 30 sec

Check peer controller completion

No peer responding, peer battery is off

Batteries are now in Ship Mode!

Placing array in standby mode.To exit standby mode press and hold a

standby switch on any controller in the array.

4. 关闭机柜电源。

注：如果您使用网络连接，则会话将在阵列完全关闭之前断开连接。在电源设备中关闭阵

列电源之前，确认每个控制模块上的 ACT LED 均已熄灭(不亮)。

5. 执行阵列维护后，可接通阵列的电源。当阵列重新启动完成后，成员和卷将设置为

联机。