Owners Manual

PS6610 Hardware Owner's Manual 2 Drive Maintenance

Remove Disk Drives

Note: Removing a drive is easier if you work from the side of the open drawer.

1. Using two hands, apply firm downward pressure to the top surface of the drive carrier.

2. While maintaining downward pressure, use one finger to press the release button on the center of

the carrier and push it in the direction of the arrow (callout 1 in Figure 10). The drive latch opens

and the drive will emerge partway from the array.

Caution: When removing an active rotational drive, allow the drive to spin down for a few moments

before removing it fully from the drive bay.

3. Pull the drive out by its carrier until it is free of the drive bay.

Figure 10: Removing a 3.5-Inch Drive