Owners Manual

PS6610 Hardware Owner's Manual 5 Maintain Fan Modules

Install a Cooling Fan Module

Caution: Do not allow the array to operate for more than 2 minutes without a fan module in place to

maintain proper cooling of the array.

How to Install a Cooling Fan Module

Wear electrostatic protection when handling a cooling module. See Hardware Protection on page 6.

To insert a cooling module:

1. Hold the cooling modules so that the orange tab is in the upper right (callout 2 in Figure 27).

2. Slide the fan module (callout 1 in Figure 27) into the chassis until it is fully seated and the release

latch clicks into place.

Figure 27: Inserting a Cooling Fan Module