Service manual
2. Connect all motherboard NICs to LAN connections.
3. If you have not already done so, connect keyboard, monitor, and mouse.
4. Do the following:
a) Insert the Recovery CD.
b) Restart the machine.
If there is a problem restarting, hold the standby button down for ve seconds to force a hard
shutdown. Then press the standby button again to startup.
The system boots from the Recovery CD.
The Acronis program loads.
5. On the Acronis Rescue Media page, select Acronis Backup and Recovery 11.5 (64-bit...)
The Acronis Backup and Recovery page opens.
6. On the Acronis Backup and Recovery page, select Back up now.
The Back up now page opens.
7. On the Back up now page, under What to back up, select Item to back up.
The Select item to back up dialog box opens.
8. On the Select item to back up dialog box, do the following:
a) Under Disk 1 select C and D. Clear other check boxes.
b) Click OK.
The Select item to back up dialog box closes.
9. On the Back up now page, under Where to back up, select Location.
The Select location back up dialog box opens.
10. On the Select location back up dialog box, do the following:.
a) Expand the tree-view Local folders node and select E:.
b) Enter a name for your backup.
c) Click OK.
The Select location back up dialog box closes.
11. On the Back up now page, under How to back up, do the following:
a) Set Backup type to Full.
b) This is recommended for your rst backup. For subsequent backups, you can optionally set
this to Incremental or Differential.
c) Set Validation to Validate a backup as soon as it is created.
12. On the Back up now page, click OK.
The backup begins and the Backup Details page opens.
13. On the Backup Details page, select the Progress tab to view the progress.
14. Verify when the data is successfully backed up.
15. Close all Acronis pages and the Acronis main window.
The machine restarts automatically.
16. Remove the recovery media while the machine is shutting down.
112 K2 Installation and Service Manual 2013 07 20
Managing K2 Software