Service manual

6. Click OK.
The Conguration File dialog box opens.
The conguration le for the media le system is displayed.
7. Verify media le system parameters.
Do not edit the conguration le for the media le system.
8. Click Accept.
A “…Please wait…” message box displays progress and a “…succeeded…” message conrms
the process is complete.
A message informs you that you must restart the server, however the restart at the end of the
Congure K2 Server wizard sufces, so you do not need to restart now.
9. Close the Storage Utility.
NOTE: Do not attempt to start SAN-attached systems or otherwise bring the SAN online until
instructed to do so by the documented procedure.
Next, continue with conguring the server using the K2Cong application.
Configuring the server - Part 2
Configure File System Server Configuration page - Basic K2 SAN
Prerequisites for connected K2 RAID storage:
• Network and SNMP settings congured
• Disks bound
2013 07 20 K2 Installation and Service Manual 137
Conguring and licensing the K2 SAN