Service manual

Click Next.
You do not need to enter or congure anything on this page.
The FTP Server Conguration page opens.
Configure FTP Server Configuration page - Basic K2 SAN
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4, FTP Data Socket
Timeout = 60, and FTP Port = 21. Only qualied Grass Valley personnel should specify other values,
as these settings are intended for use only with custom systems designed by Grass Valley.
1. Select MXF export type as follows:
• 377M: Original SMPTE 377M style. Ensures compatibility with older products.
• 377-1: Newer SMPTE 377-1 style.
2. Click Next.
The Completing the Conguration Wizard page opens.
3. Click Finish.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
Proceed as follows:
• If you have NH servers, congure them next.
2013 07 20 K2 Installation and Service Manual 141
Conguring and licensing the K2 SAN