Service manual

Configure Network Configuration page - NH server
This page displays the control network Ethernet port, and allows you to congure the FTP/Streaming
network Ethernet port.
1. Verify that the top port is congured correctly.
The top port is the port over which the K2Cong application is communicating. If correctly
congured, it is already assigned the control network IP address, as displayed on this page.
2. Verify that the FTP/Streaming port is congured correctly. If not congured correctly, do the
following:
a) Select the other port and click Modify.
A network conguration dialog box opens.
b) Enter the FTP/Streaming IP address and the subnet mask and click Apply.
3. Click Next.
The File System Server Conguration page opens.
144 K2 Installation and Service Manual 2013 07 20
Conguring and licensing the K2 SAN